Author Topic: ¿Durango Ideas?  (Read 3062 times)

Offline Durango

  • Trail Passenger
  • *
  • Posts: 10
¿Durango Ideas?
« on: February 08, 2015, 09:26:35 AM »
She's no jeep... But does anyone smell a solid front axle swap this spring? Old XJ axle? Input on what I'm getting myself info?  Could use some serious help and I'm willing to put something down for this and take in a lot of learning in the process.

Sorry I missed the last meeting I was called into work, I'll be at the next trail ride.
(Front recovery point in the picture, Trashed those A/T.)  ::) :P

Anyone with any axles, hands, help, I could use it.

Also, I'll be down at Rausch Creek the weekend of April 24th if anyone wants to meet up.
« Last Edit: February 08, 2015, 09:53:05 AM by Durango »
Sean
03 Dodge Durango, 4.7 V8
3" T/S lift, 3" Leaf
285/75 Mastercraft MXT

Offline 98xj

  • Mudd Hog
  • ***
  • Posts: 143
  • 98 Cherokee 4.5in on 33's
Re: ¿Durango Ideas?
« Reply #1 on: February 08, 2015, 12:35:20 PM »
I'm swapping in two dana 44s at some point (tbd) and I won't need my stock axles. I could sell you them. HPD30 and C8.25

Offline Durango

  • Trail Passenger
  • *
  • Posts: 10
Re: ¿Durango Ideas?
« Reply #2 on: February 08, 2015, 05:27:43 PM »
Could possibly fit, I have to do a bit more looking. My swap is TBD too, but it's nice to know I have a go-to axle spot if needed. Thanks!
Sean
03 Dodge Durango, 4.7 V8
3" T/S lift, 3" Leaf
285/75 Mastercraft MXT

Offline 98xj

  • Mudd Hog
  • ***
  • Posts: 143
  • 98 Cherokee 4.5in on 33's
Re: ¿Durango Ideas?
« Reply #3 on: February 08, 2015, 08:54:34 PM »
Sounds good, I'm not very familiar with Durango builds so forgive my lack of input lol

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: ¿Durango Ideas?
« Reply #4 on: February 08, 2015, 11:28:39 PM »
does anyone make a kit for the Durango?  that's the way to go, it's a lot of work if you have to fab up one from scratch!
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline 98xj

  • Mudd Hog
  • ***
  • Posts: 143
  • 98 Cherokee 4.5in on 33's
Re: ¿Durango Ideas?
« Reply #5 on: February 09, 2015, 01:20:20 AM »
Does the Durango have an IFS setup? 

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: ¿Durango Ideas?
« Reply #6 on: February 09, 2015, 01:48:58 AM »
I did a quick google search for Durango SAS and found a build thread on Pirate4x4. I don't know how to copy a link and post through my phone, but it was easy to find and would give you a good idea of what you're in for.
1994 YJ on 37s

Offline 98xj

  • Mudd Hog
  • ***
  • Posts: 143
  • 98 Cherokee 4.5in on 33's
Re: ¿Durango Ideas?
« Reply #7 on: February 09, 2015, 04:05:39 AM »
I did a quick google search for Durango SAS and found a build thread on Pirate4x4. I don't know how to copy a link and post through my phone, but it was easy to find and would give you a good idea of what you're in for.

http://www.pirate4x4.com/forum/dodge/1069789-sas-durango.html

There you go!

Offline Durango

  • Trail Passenger
  • *
  • Posts: 10
Re: ¿Durango Ideas?
« Reply #8 on: February 09, 2015, 05:55:12 AM »
I read another detailed step-by-step on another Dodge forum, I'll have to look back for it. This looks very similar, seems like a challenging but rewarding project. I definitely have not seen one sit that high though, seems like the d44 and d60 from a 96 or newer Ram or Ford would be the only options for axles.
Thanks for the replies!
« Last Edit: February 09, 2015, 06:04:40 AM by Durango »
Sean
03 Dodge Durango, 4.7 V8
3" T/S lift, 3" Leaf
285/75 Mastercraft MXT

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: ¿Durango Ideas?
« Reply #9 on: February 09, 2015, 12:12:57 PM »
Due to the weight of a Durango I wouldn't go any smaller axle than a D44 for the front axle. D30s are great axles, but they are primarily in lightweight Jeeps.
1994 YJ on 37s

Offline 98xj

  • Mudd Hog
  • ***
  • Posts: 143
  • 98 Cherokee 4.5in on 33's
Re: ¿Durango Ideas?
« Reply #10 on: February 09, 2015, 01:52:21 PM »
Figured I'd give it a try, makes sense though. I guess I was thinking about the width fitment haha. All. I have from a Durango is a steering box  ::) Have you priced out how much all that will run you? D44s are cheap enough but the right D60 can be pricey.

Offline Durango

  • Trail Passenger
  • *
  • Posts: 10
Re: ¿Durango Ideas?
« Reply #11 on: February 09, 2015, 04:54:32 PM »
I'm probably in for $800-$1500 if all goes well. Could spike if I go for both front and rear. 44 would be perfect in the front and 60 in the rear to have improved gearing across the board. Taking it one step at a time.
Sean
03 Dodge Durango, 4.7 V8
3" T/S lift, 3" Leaf
285/75 Mastercraft MXT

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: ¿Durango Ideas?
« Reply #12 on: February 09, 2015, 05:19:59 PM »
Do you know what axle you have in the rear of the Durango? I have no clue what it is or how strong it is. If it's similar to the 8.25 that came in the later year XJs you'd probably be ok up to a 33 and maybe even a 35" tire if you're not heavy footed. What gears do you want to run? Finding a D60 for the rear with the gearing you want is going to be difficult. Chances are you'll be regearing both axles or if you manage to find a D44 or D60 for the front with the gearing you want you'll still be re-gearing the rear axle to match. I would venture to guess you'll be almost $1500 into the axles alone unless you find a pair being sold somewhere with the same gearing. Even then you'll be cutting off spring perches and setting it up for the correct stuff for the Durango.

How good are you with a welder? There's going to be a lot of welding and fabrication involved from the little bit I know about this type of swap.
1994 YJ on 37s

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: ¿Durango Ideas?
« Reply #13 on: February 09, 2015, 06:42:29 PM »
It's either an 8.25 or 9.25 chrysler rear diff. Thats the only diff they came with.
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: ¿Durango Ideas?
« Reply #14 on: February 09, 2015, 07:42:28 PM »
if you don't pickup a matching set of axles, just keep in mind that you don't want to have two different lug nut patterns between the front and rear...
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!