Author Topic: Hot-Rods' broken cv bearing  (Read 7427 times)

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: Hot-Rods' broken cv bearing
« Reply #15 on: January 13, 2008, 03:52:46 PM »
I don't mean to hijack this but Al can you pm me a link to the dana 30 shafts that you put in. Thanks Brian

rather than a hijack, or pm, I started a new thread
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Hot-Rods' broken cv bearing
« Reply #16 on: January 14, 2008, 03:21:36 PM »
i like the cvs still but it's not old. yet.

it's wierd, i survived vanes almost the whole till i had one hop. and that was it. but then on thursday, i had the wheel cranked and locked the drive train on a branch. sun night, front psngr tire was in a hole and pulled it enough that it pretty much dis-located. so i am not too bent about it. plus, this being the third time, it's getting really quick changing them out.

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: Hot-Rods' broken cv bearing
« Reply #17 on: January 14, 2008, 03:25:37 PM »
IFS+LOCKER+GEARS= SNAP,CRACKLE,POP!! 

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Hot-Rods' broken cv bearing
« Reply #18 on: January 14, 2008, 03:30:19 PM »
really cute. every one start hamming it up.  :P

BUT some day when i'm all big and bad and stuff, you'll be sorry. ;D

Offline reg

  • Trail Master
  • *****
  • Posts: 933
Re: Hot-Rods' broken cv bearing
« Reply #19 on: January 14, 2008, 04:18:34 PM »
IFS+LOCKER+GEARS= SNAP,CRACKLE,POP!! RICE TACOS






oh that was soo low... i almost feel bad

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: Hot-Rods' broken cv bearing
« Reply #20 on: January 14, 2008, 05:39:19 PM »
I miss tacos de papas.

Back to topic...I wanna know how Hot-Rod's getting FREE CVs everytime he farts one up?
~J.D.~
"When life gets too hard to stand....crawl."

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: Hot-Rods' broken cv bearing
« Reply #21 on: January 14, 2008, 05:42:32 PM »
lifetime waranty, but I'm guessing that they won't tolerate his "abuse" too much longer.  :)
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: Hot-Rods' broken cv bearing
« Reply #22 on: January 14, 2008, 05:46:28 PM »
lifetime waranty, but I'm guessing that they won't tolerate his "abuse" too much longer.  :)

OOoooOOOooo I thought he was getting all kinds of hookups...you know, free car washes etc  :P

I wonder how much longer Advanced Auto will keep replacing them?
~J.D.~
"When life gets too hard to stand....crawl."

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Hot-Rods' broken cv bearing
« Reply #23 on: January 15, 2008, 12:17:32 AM »
till mexico goes out of business

Offline reg

  • Trail Master
  • *****
  • Posts: 933
Re: Hot-Rods' broken cv bearing
« Reply #24 on: January 15, 2008, 12:18:19 AM »

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Hot-Rods' broken cv bearing
« Reply #25 on: January 15, 2008, 12:20:04 AM »
thats where thay get them

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: Hot-Rods' broken cv bearing
« Reply #26 on: January 15, 2008, 12:24:53 AM »
As long as it's not a Limited lifetime warranty, it shouldn't be an issue.  Look on the bright side, Hot-Rod, you're cv part was what?  $160 with the lifetime warranty?  You know what my warranty is?  A NEW F'ING AXLE!   >:(



I'd rather replace cv's... :'(
Axle:  2
Nemesis: 1

I win!

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: Hot-Rods' broken cv bearing
« Reply #27 on: January 15, 2008, 12:26:59 AM »
well, less than 80.00 bucks a piece

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: Hot-Rods' broken cv bearing
« Reply #28 on: January 15, 2008, 12:33:10 AM »
generally the warranty says stuff about not covered for abuse, and they usually say stuff about racing, off-road, etc.

I'm sure you'll be fine for a few, especially if you know somebody there, but sooner or later, their upstream supplier is going to start telling them that they won't take them back anymore, because it's not possible to be breaking so many so quickly without abuse.
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: Hot-Rods' broken cv bearing
« Reply #29 on: January 15, 2008, 12:37:56 AM »
I talked to the guy at advanced and he said to me that after the first breakage, the second is warrenteed for 90 days.  He also said not to say you broke it wheeling, say something like you broke it driving in snow.  Abuse is not covered, but they don't care as long as they have plausible deniability. 

Good thing for Jon and I: 79.95 each, minus 10% military discount, and they are not side-specific.  I can use the same on on either side :D
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work