JT4x4
The Mud Pit => Trading Post => Topic started by: Coqui on October 11, 2012, 11:26:44 PM
-
Looking for TC output shaft for NP231J?
-
Are you looking for a SYE kit and CV drive shaft or a stock cone and stock shaft? I have a box full of stock shafts and cones from doing SYE kit installs.
-
Stock shaft for now.....just to get my Jeep back on the road....w/out vibration.
it is easy to replace the stock shaft?
-
it is easy to replace the stock shaft?
4 bolts and about a half an hour
-
it is easy to replace the stock shaft?
4 bolts and about a half an hour
umm... I think you have to seperate the cases to get the output shaft out. but why? vibrations rarely come from the Transfer Case. usually they come from the driveshaft (usually a weight gets knoked off) or ujoints, or yoke.
-
it is easy to replace the stock shaft?
4 bolts and about a half an hour
umm... I think you have to seperate the cases to get the output shaft out. but why? vibrations rarely come from the Transfer Case. usually they come from the driveshaft (usually a weight gets knoked off) or ujoints, or yoke.
i thought he was talking drive shaft and the slip yoke was bent the out put shaft on a tcase does not normally bend it breaks due to the hardeness of the metal
-
My TC output shaft is bent and whobbly...looking at installing adv adapters SYE w/CV DS. Never done this kind of repair on a jeep, just wondering the complexity of the job.