Author Topic: May be wrenching soon  (Read 2219 times)

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
May be wrenching soon
« on: October 06, 2008, 10:55:17 PM »
I've had a small vibration for a long time now with my XJ, but after leaving Mabell Saturday the vibration has gotten much worse and really feels like it's coming from the front end. Tony took this picture while we were out there and I just happen to notice the angle (bend) of my front driveshaft. I think I overextended it and probably just about had it come apart. I'm going to try to get time to take the front driveshaft out and see if that alleviates my vibration, but my guess is the splines are bent now.


1994 YJ on 37s

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: May be wrenching soon
« Reply #1 on: October 06, 2008, 10:56:57 PM »
call me before you start!  i'm on a 2-month vacation and looking to keep busy.  also, you can work at my place if you don't have a garage
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: May be wrenching soon
« Reply #2 on: October 07, 2008, 12:47:42 AM »
I'll take you up on that. What I want to do is remove the front driveshaft and take it out for a ride to see if the vibration goes away. If it does, great because I don't have to keep testing other parts. I'll just replace the driveshaft. I really need something longer anyway. The one in it is still the stock one. We can talk about it over at your place tomorrow night.
1994 YJ on 37s

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: May be wrenching soon
« Reply #3 on: October 07, 2008, 12:51:59 AM »
if nothing else... NICE FLEX!!
Living in Preston. Call me if you're going wheeling!

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: May be wrenching soon
« Reply #4 on: October 07, 2008, 02:41:04 AM »
if nothing else... NICE FLEX!!

I hope you're referring to the XJ flexing and not the driveshaft flexing. ;D
1994 YJ on 37s

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: May be wrenching soon
« Reply #5 on: October 07, 2008, 09:50:39 PM »
oh... the XJ was flexing..??? ::)
Living in Preston. Call me if you're going wheeling!

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: May be wrenching soon
« Reply #6 on: October 08, 2008, 11:44:25 PM »
I took the front driveshaft out tonight after work and then went for a drive. There was no difference in the vibration at all. I did notice that my transmission mount is shot though. The rubber part that sits on the crossmember has completely disintegrated. I'm going to put the front driveshaft back in and then remove the rear and take it for a drive. I can see by the slip yolk that it's resting in a different place than it was before, probably due to the transmission mount being shot and having one motor mount bad. Transmission mount and motor mount are going to have to be done soon.
1994 YJ on 37s

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: May be wrenching soon
« Reply #7 on: October 09, 2008, 04:38:50 AM »
let me know when you have the parts
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: May be wrenching soon
« Reply #8 on: October 09, 2008, 03:27:52 PM »
I'm stopping by autozone tonight. They'll probably have the engine mount, but not the trans mount so that may be a few days before it arrives.
1994 YJ on 37s

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: May be wrenching soon
« Reply #9 on: October 09, 2008, 07:54:53 PM »
oh... the XJ was flexing..??? ::)

It flexed here...  LMAO

Click ME

Offline CnoteTJ

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 475
    • Facebook
Re: May be wrenching soon
« Reply #10 on: October 09, 2008, 09:36:42 PM »
where are the rest of the videos?  i would like to see the fruits of my labor :D
2011 Black Jeep Wrangler Rubicon
4" FT Long Arm w/ CRC link and 35" MTR/K's
Some armor and performance goodies!

www.northridge4x4.com    www.offroadevolution.com   www.full-traction.com

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: May be wrenching soon
« Reply #11 on: October 10, 2008, 03:54:45 PM »
where are the rest of the videos?  i would like to see the fruits of my labor :D

As stated above, I need to find a way to put them up elsewhere. JT4x4's Photobucket is maxed out so.. I can burn a few DVD's for those that want them...Although I don't have any blank ones...Those in a hurry can get me a blank DVD and I'll try to get them burned fairly quick...Otherwise, be patient until I figure out where to put them...

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: May be wrenching soon
« Reply #12 on: October 10, 2008, 06:33:02 PM »
Did you already look at Webshots?  Are there too many restrictions?  There's also Shutterfly, and some others. 
Axle:  2
Nemesis: 1

I win!

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: May be wrenching soon
« Reply #13 on: October 11, 2008, 02:34:55 AM »
Did you already look at Webshots?  Are there too many restrictions?  There's also Shutterfly, and some others. 

Those are for photos, not 110+ MB videos...Still looking...

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: May be wrenching soon
« Reply #14 on: October 11, 2008, 02:35:12 PM »
what about a personal Photobucket account?
Living in Preston. Call me if you're going wheeling!