« previous next »
Pages: [1] 2 3 ... 6   Go Down

Author Topic: YJ Progress  (Read 24367 times)

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
YJ Progress
« on: January 27, 2015, 01:26:28 AM »
Pam is going to be out of town this weekend and I need to get work done. I could some help with the old body lift removal and installation of the new one along with installing the gas tank and skid. Not sure yet if we are going to have to cut old body bolts or the body to get those bolts out.  I have a welder, but haven't practiced enough with it to trust putting body pieces back if we have to do some cutting. If you have a plasma cutter that you could bring along that would be great for bolt removal.

Originally I planned to work both Saturday and Sunday, but Sunday doesn't look like it's going to happen now. Anybody that can help out Saturday stop on by. I'll pick up water, sodas and some beer along with ordering pizzas or something
« Last Edit: April 27, 2015, 03:30:32 AM by calvynandhobbs »
Logged
1994 YJ on 37s

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Work weekend Feb 7th and 8th
« Reply #1 on: January 28, 2015, 06:04:59 PM »
I can provide moral & tech support and maybe some one armed wrenching!
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline JKSue

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 307
Re: Work weekend Feb 7th and 8th
« Reply #2 on: January 28, 2015, 06:32:11 PM »
I can come drink beer & eat pizza.  ;)
Logged

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Work weekend Feb 7th and 8th
« Reply #3 on: January 28, 2015, 06:38:39 PM »
My daughter home from collage for her birthday that wk end. Sorry
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 730
Re: Work weekend Feb 7th and 8th
« Reply #4 on: January 29, 2015, 02:56:01 PM »
I am going to try and get over and give you a hand Roger. What time are you thinking?
Chuck
Logged
Tube chassis, 5.3LS, Ford Dana 60 Chevy 14 Bolt 5.13 gears. 203/205 doubler, Hydro steering, air shocks, 42 inch Iroks on 16.5 H1 double bead locks.

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Work weekend Feb 7th and 8th
« Reply #5 on: January 29, 2015, 06:04:00 PM »
Quote from: Big Chuck on January 29, 2015, 02:56:01 PM
I am going to try and get over and give you a hand Roger. What time are you thinking?
Chuck

I sent a note to Rock about getting my tires mounted on the rims one of those two mornings. I'm thinking 10am start for each day unless I can get my tires mounted early one of those two days and then that day may push out to a noon start. I'll know more by our meeting Tuesday.

Pam is pushing that I need to have progress by the end of February or I should just sell it as a project and wait to buy something already done. You guys know how that works though. Nothing is ever done.
Logged
1994 YJ on 37s

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 730
Re: Work weekend Feb 7th and 8th
« Reply #6 on: January 29, 2015, 07:11:11 PM »
From what I saw of your project last week, I believe you could have this thing yard driving in a weekend. That jeep is clean, I will bring my 250K propane heater if you would like.
Logged
Tube chassis, 5.3LS, Ford Dana 60 Chevy 14 Bolt 5.13 gears. 203/205 doubler, Hydro steering, air shocks, 42 inch Iroks on 16.5 H1 double bead locks.

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Work weekend Feb 7th and 8th
« Reply #7 on: January 29, 2015, 08:17:26 PM »
I've got a couple kerosene heaters down there that we can use. One sounds like a jet engine taking off with electric/kerosene and the other is more of just a space heater once the garage is warm. The jet engine is only used for a few minutes and then the other one maintains.
Logged
1994 YJ on 37s

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Work weekend Feb 7th
« Reply #8 on: February 04, 2015, 02:47:32 PM »
Just looked at Sunday and I'm going to cancel the work on the YJ for Sunday. I've got a couple dogs coming in and they are talking about snow all day. Hopefully we can get the gas tank/skid installed and the body lift installed. Maybe even the leaf springs and axles. We'll see how it goes.

Does anybody have a small jack that can fit between the body and frame to pry up one side at a time?
Logged
1994 YJ on 37s

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Work weekend Feb 7th
« Reply #9 on: February 04, 2015, 11:33:42 PM »
A pipe or even 2x4 should work...
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline Mayhem

  • BANNED
  • Rock Crawler
  • *****
  • Posts: 336
Re: Work weekend Feb 7th
« Reply #10 on: February 05, 2015, 02:42:43 AM »
Quote from: Mr Rock on February 04, 2015, 11:33:42 PM
A pipe or even 2x4 should work...

I have a nice scissor jack that will fit under about anything.
Logged
Greg
Model Citizen

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 730
Re: Work weekend Feb 7th
« Reply #11 on: February 05, 2015, 02:51:22 AM »
RoverI will bring a floor jack and a few stands. Do you have all the hardware needed, grade 8 assorted nuts/bolts/ lock washers/ flat washers, bottle of never sieze, white lithium grease? You know stuff, lol. I will be there for 10am.
chuck
Logged
Tube chassis, 5.3LS, Ford Dana 60 Chevy 14 Bolt 5.13 gears. 203/205 doubler, Hydro steering, air shocks, 42 inch Iroks on 16.5 H1 double bead locks.

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 730
Re: Work weekend Feb 7th
« Reply #12 on: February 05, 2015, 02:51:59 AM »
Sorry I meant Roger lol
Logged
Tube chassis, 5.3LS, Ford Dana 60 Chevy 14 Bolt 5.13 gears. 203/205 doubler, Hydro steering, air shocks, 42 inch Iroks on 16.5 H1 double bead locks.

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Work weekend Feb 7th
« Reply #13 on: February 05, 2015, 03:44:33 AM »
I think I have everything we will need.
Logged
1994 YJ on 37s

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Work weekend Feb 7th
« Reply #14 on: February 06, 2015, 02:14:19 AM »
Hey Chuck, if you want to bring the propane heater you can. I was out there tonight moving some things areound and notices that the torpedo kerosene heater smells. Lol
Logged
1994 YJ on 37s
Pages: [1] 2 3 ... 6   Go Up
« previous next »