Author Topic: Next Wrench Day  (Read 2352 times)

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Next Wrench Day
« on: September 16, 2013, 10:27:54 PM »
Hey everyone, Jon and I will be working on his JK in my garage on Saturday the 21st. Come on by if you want to lend a hand or need to work on your own stuff! hope to have Jon there by 9:AM
« Last Edit: September 17, 2013, 12:39:35 AM by Mr Rock »
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline JKJon

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 343
Re: Next Wrench Day
« Reply #1 on: September 17, 2013, 02:37:55 PM »
Sounds good Rock. I can be there as early as you want.

Offline JKJon

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 343
Re: Next Wrench Day
« Reply #2 on: September 22, 2013, 02:25:03 AM »
Success!!! Huge thanks to Rock!! We got my front axles sleeved,, new synergy front tie rod on and new fox steering stabilizer on. All in all it went really  smooth. Some serious pounding with a 10 lb sledge hammer for about 25 minutes just on one side, but they eventually went all the way in. (these were the Nitro weldless bang in axle sleeves) Trust me, these things are never gonna move.

Thanks again Rock!!

Oh ya and I am now rolling on 37" MT/R's !!!!

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Next Wrench Day
« Reply #3 on: September 22, 2013, 03:41:26 AM »
37's!!!
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Next Wrench Day
« Reply #4 on: September 22, 2013, 02:49:34 PM »
Sweet!!  Cant wait to see it
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Next Wrench Day
« Reply #5 on: September 22, 2013, 03:11:32 PM »
Congrats on getting the work done and wow, 37s?
1994 YJ on 37s

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Next Wrench Day
« Reply #6 on: September 23, 2013, 06:18:56 PM »
We got my front axles sleeved,  All in all it went really  smooth. Some serious pounding with a 10 lb sledge hammer for about 25 minutes just on one side, but they eventually went all the way in. (these were the Nitro weldless bang in axle sleeves) Trust me, these things are never gonna move.

This is what it looks like after they were installed.





'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Next Wrench Day
« Reply #7 on: September 23, 2013, 06:23:31 PM »
And this is what the "special" tool I made looked like by the time we were done pounding on it!!

I used 1-1/4 pipe and 3/8 plate steel on either end!! 

It started to mushroom at each end before it bent!!

That was some serious pounding to get them in all the way!!

'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Next Wrench Day
« Reply #8 on: September 24, 2013, 03:49:03 AM »
Maby a bigger hammer was needed. Lol
Great job. Glad to say I was not there to help cuz my back would be a total wreck after swinging a hammer like that.
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Next Wrench Day
« Reply #9 on: September 24, 2013, 05:48:17 AM »
We broke the first 10lb sledge and luckily the second made it to the end!

John did most of the swinging I wonder how sore he was/is???
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!