Author Topic: Painter for my Parts (aka get this heep done)  (Read 2971 times)

Offline Bill3753

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 476
Painter for my Parts (aka get this heep done)
« on: January 29, 2013, 05:11:37 AM »
I'm looking for anyone that can paint or knows of someone who paints cars in their spare time.  Not looking for a show car finish by any means.  Just looking to be able to drop the front fenders, quarters, sliders, tire carrier, and maybe a cage off in bare metal and pick it up in a semi-gloss black finish.

Was originally going to use semi gloss black rustoleum paint that is around $30-$40 a gallon and would supply the paint.  Looking to get it all sprayed in primer, then paint.  I'd like to still use the rustoleum because it'd be easy to match touch ups when I beat it up (which I will if it ever gets done).

Idea here is I'll pay to have one less thing I have to worry about and to get me one step closer to being complete with my Jeep.

Let me know.  My phone number is on the member side, but I can't have my phone at work so emails or PM's here would probably be easiest.

04 TJ, HP60, 14 Bolt, 5.13's, linked, locked, on 38's and (still) in the works.

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Painter for my Parts (aka get this heep done)
« Reply #1 on: January 29, 2013, 09:32:35 AM »
i can do it 


its only a 20 hour drive
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline Bill3753

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 476
Re: Painter for my Parts (aka get this heep done)
« Reply #2 on: February 25, 2013, 05:54:03 AM »
No one?  Not looking for a pro job.  Just someone with a spray gun, compressor, and time essentially.
04 TJ, HP60, 14 Bolt, 5.13's, linked, locked, on 38's and (still) in the works.

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Painter for my Parts (aka get this heep done)
« Reply #3 on: February 25, 2013, 02:35:24 PM »
I don't think I know anybody that paints cars.
1994 YJ on 37s

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Painter for my Parts (aka get this heep done)
« Reply #4 on: February 25, 2013, 04:36:16 PM »
No one?  Not looking for a pro job.  Just someone with a spray gun, compressor, and time essentially.

I'm only good with rattle cans!
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Painter for my Parts (aka get this heep done)
« Reply #5 on: February 25, 2013, 05:21:45 PM »
No one?  Not looking for a pro job.  Just someone with a spray gun, compressor, and time essentially.

I'm only good with rattle cans!

I'm ok with a rattle can, but I think my Jeep is going to get a roll-on paint job. I've done a couple of those and they've turned out pretty good.
1994 YJ on 37s

Offline Bill3753

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 476
Re: Painter for my Parts (aka get this heep done)
« Reply #6 on: February 26, 2013, 05:15:08 AM »
No one?  Not looking for a pro job.  Just someone with a spray gun, compressor, and time essentially.

Roll on has always been the plan.  Just space and time is what I'm thinking about here.  Basically, it'll get me back on the trail faster.

If not, rollers are gonna be hot haha.

I'm only good with rattle cans!

I'm ok with a rattle can, but I think my Jeep is going to get a roll-on paint job. I've done a couple of those and they've turned out pretty good.
04 TJ, HP60, 14 Bolt, 5.13's, linked, locked, on 38's and (still) in the works.

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: Painter for my Parts (aka get this heep done)
« Reply #7 on: February 27, 2013, 08:53:54 PM »
I've got the guns and the compressor.  If you have the space and time you can borrow them.  I painted my motorcycle a couple years back, gave me a great appriciation for the work that goes into a job.

Offline Gr33NGoph3R

  • Honorary Member
  • Mudd Hog
  • ***
  • Posts: 158
Re: Painter for my Parts (aka get this heep done)
« Reply #8 on: April 16, 2013, 12:18:04 AM »
https://www.facebook.com/photo.php?fbid=144684965459&set=pb.633515459.-2207520000.1366064577&type=3&theaterDid you get anywhere with this I don't have a spray gun but could pick one up cheap and I've painted before not especially good at it but could certainly do it. the link is a car I did about 4 years ago lol
« Last Edit: April 16, 2013, 12:24:55 AM by Gr33NGoph3R »

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: Painter for my Parts (aka get this heep done)
« Reply #9 on: April 16, 2013, 02:57:27 PM »
I paint. Hit me up. 631 2942859

Still want my cage?
Living in Preston. Call me if you're going wheeling!