« previous next »
Pages: [1]   Go Down

Author Topic: 1997 Jeep Grand Cherokee for parts  (Read 3929 times)

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
1997 Jeep Grand Cherokee for parts
« on: May 03, 2012, 04:37:51 PM »
My daughter was recently in an accident with her Jeep Grand Cherokee and was hit just right in the front bumper to twist the unibody up in the front beyond my repair capabilities. The rest of this Jeep is in outstanding condition with no rust on the tailgate or on the bottom of the doors at all. The interior is in great condition. The 4.0 has 130,974 miles on it and runs great without burning or leaking a drop of oil between oil changes every 3k miles. The transmission was serviced at 39k miles and then again at 77k miles and shifts great. Both axles have also had servicing and fluid changes.  Dana 30 front axle and Dana 35 rear axle with disk brakes. Great parts for repairing a rusty one or if you have the know-how fix this one and put it right back on the road.
Would like to sell whole for $800 OBO.
Email Roger at calvynandhobbs@aol.com or call me at 860-222-4575



« Last Edit: May 05, 2012, 07:14:47 PM by calvynandhobbs »
Logged
1994 YJ on 37s

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: 1997 Jeep Grand Cherokee for parts
« Reply #1 on: May 03, 2012, 05:48:00 PM »
Wow thats clean :o
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Carfreek458

  • Mudd Hog
  • ***
  • Posts: 163
  • Go big or go home
Re: 1997 Jeep Grand Cherokee for parts
« Reply #2 on: May 04, 2012, 09:41:31 PM »
Hey what kind of T-Case is in it? And How much would you sell the front seats for?
Logged
1997 Jeep Cherokee XJ 5spd, 4in lift, locked D30/Ruff stuff diff cover, Detours back bone/JCR frame stiffeners Quadratec winch, Full exhaust, Tomken engine/tranny skid, Custom HD crossmember, Rock Hard roll cage, Rock Hard rear bumper, JCR Upper quarter gaurds with LED tail lights and 33s

Offline Carfreek458

  • Mudd Hog
  • ***
  • Posts: 163
  • Go big or go home
Re: 1997 Jeep Grand Cherokee for parts
« Reply #3 on: May 04, 2012, 09:43:14 PM »
Also, how much for the D35
Logged
1997 Jeep Cherokee XJ 5spd, 4in lift, locked D30/Ruff stuff diff cover, Detours back bone/JCR frame stiffeners Quadratec winch, Full exhaust, Tomken engine/tranny skid, Custom HD crossmember, Rock Hard roll cage, Rock Hard rear bumper, JCR Upper quarter gaurds with LED tail lights and 33s

Offline reptile610

  • Trail Master
  • *****
  • Posts: 862
Re: 1997 Jeep Grand Cherokee for parts
« Reply #4 on: May 04, 2012, 11:25:12 PM »
i thought u said that your daughter drove a liberty ??? that sucks anyways though. she ok? where is this located? im sure it's already up on GL4x4 right?
Logged
1982 CJ7-stock

Owning a CJ is for manly men, they allows you to do manly stuff like auto mechanics and welding and drinking beer. Manly men own CJs. Manly men do not drive hummers, they receive them.

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: 1997 Jeep Grand Cherokee for parts
« Reply #5 on: May 05, 2012, 07:49:02 AM »
what no last stand for the grand

take it to btc and have some fun
Logged
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: 1997 Jeep Grand Cherokee for parts
« Reply #6 on: May 05, 2012, 03:06:50 PM »
Quote from: Carfreek458 on May 04, 2012, 09:41:31 PM
Hey what kind of T-Case is in it? And How much would you sell the front seats for?

By looking at the interior pic I think it's a 242. Look at the T Case shifter & it looks like it has the full time & part time options.
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: 1997 Jeep Grand Cherokee for parts
« Reply #7 on: May 05, 2012, 07:13:26 PM »
Yes, the t-case is a 242. I'm going to try selling it whole just to get it out of my hair without having to spend a lot of time on it. If it doesn't go whole within a couple weeks I will start parting it out.
Logged
1994 YJ on 37s

Offline Carfreek458

  • Mudd Hog
  • ***
  • Posts: 163
  • Go big or go home
Re: 1997 Jeep Grand Cherokee for parts
« Reply #8 on: May 06, 2012, 03:08:03 AM »
If you do part it out, I want dibs on the 242 T-Case and the two front seats.
Logged
1997 Jeep Cherokee XJ 5spd, 4in lift, locked D30/Ruff stuff diff cover, Detours back bone/JCR frame stiffeners Quadratec winch, Full exhaust, Tomken engine/tranny skid, Custom HD crossmember, Rock Hard roll cage, Rock Hard rear bumper, JCR Upper quarter gaurds with LED tail lights and 33s

Offline GreenGrandV8

  • Mudd Hog
  • ***
  • Posts: 114
  • good ol jeep
Re: 1997 Jeep Grand Cherokee for parts
« Reply #9 on: May 09, 2012, 05:18:14 AM »
so the uni got twisted?? to much to slap a bumper fender grille lights hood and all that on??? and did they call it totaled or is it still good?? you got any pics of the other side???
Logged
LOW RIDERS ARE FOR GUYS WHO CANT GET IT UP! oh ya

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: 1997 Jeep Grand Cherokee for parts
« Reply #10 on: May 09, 2012, 04:58:28 PM »
We only had minimum coverage on it since the cost of full insurance for a 17 year old was more per year than the value of the vehicle. Because of this I had it towed to the house directly and insurance hasn't even looked at it so there is nothing stating that it is totaled or anything. The hood is actually still fine. Because of the hit from the side the radiator support is pushed in and the power steering box is pushed over about 2 inches and the engine is actually lifted a little bit on that corner. Basically the front unibody frame is twisted enough that I can't straighten it and put everything back to where it's supposed to be.
Logged
1994 YJ on 37s

Offline GreenGrandV8

  • Mudd Hog
  • ***
  • Posts: 114
  • good ol jeep
Re: 1997 Jeep Grand Cherokee for parts
« Reply #11 on: May 10, 2012, 05:31:52 AM »
dam thats a bit worse than i was hopin. i was hopin i got just rig it together for my girl to have a jeep. but yeah kinda does sound like parts, unless you wanna chop it all up and do and exterior roll cage ha
Logged
LOW RIDERS ARE FOR GUYS WHO CANT GET IT UP! oh ya

Offline Carfreek458

  • Mudd Hog
  • ***
  • Posts: 163
  • Go big or go home
Re: 1997 Jeep Grand Cherokee for parts
« Reply #12 on: May 29, 2012, 06:40:30 AM »
would you sell the rear disk brakes ??? my jeep dose not stop worth of crap
Logged
1997 Jeep Cherokee XJ 5spd, 4in lift, locked D30/Ruff stuff diff cover, Detours back bone/JCR frame stiffeners Quadratec winch, Full exhaust, Tomken engine/tranny skid, Custom HD crossmember, Rock Hard roll cage, Rock Hard rear bumper, JCR Upper quarter gaurds with LED tail lights and 33s

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: 1997 Jeep Grand Cherokee for parts
« Reply #13 on: June 13, 2012, 01:58:50 PM »
SOLD
Logged
1994 YJ on 37s
Pages: [1]   Go Up
« previous next »