The Mud Pit > Wrenching
has anyone put in a SYE??
skibum:
--- Quote from: BlacXJeep on March 21, 2011, 08:24:48 PM ---
--- Quote from: Flex on March 21, 2011, 04:18:47 AM ---i would go the 231 route
--- End quote ---
not to mention the 231 is stronger than the other 2
--- End quote ---
X2 on that!! Unless you can find a Dana 300 or NP205. Otherwise if you got the cash then go with an Atlas. But for a direct bolt in the NP231 is the best option.
Swagger:
Taking in the previous five or six posts, i would say, ditch the stocker you got in there now, and spend what you would already be spending on a reman. 231 + SYE, add a little more cash to that amount and buy your self a ATLAS 2 speed, or a STAK 2 speed. Theyre both comparible in price to a built 231 w/ a SYE, but a whole lot stronger, i mean frickin bullet proof. $.02 more to ya!!
Flex:
i would say alot more cash but yea the atlas is a beast
Swagger:
Not sure if this would be the exact match, but you could play with the options to mountn up directly. this one is fitted for a TJ with a AX-15 Manual transmission, with 1310 CV style yokes front and rear.
http://www.advanceadapters.com/view_cart.php
And these are some suggestions to build a stock 231 to match the durability of an ATLAS or a STAK. But it still wouldnt be as strong.
-Low Range Conversion.
http://www.quadratec.com/products/52254_101_07.htm
-SYE Kit
http://www.quadratec.com/cart/cart.php?add0=52237+900+07
-Drive shaft
http://www.4xshaft.com/ (Probably between 300.00 and 400 dollars.
When youadd it all up, it wouldn't be that much of a difference.
gearhead1985B:
--- Quote from: Swagger on March 22, 2011, 12:17:32 AM ---Taking in the previous five or six posts, i would say, ditch the stocker you got in there now, and spend what you would already be spending on a reman. 231 + SYE, add a little more cash to that amount and buy your self a ATLAS 2 speed, or a STAK 2 speed. Theyre both comparible in price to a built 231 w/ a SYE, but a whole lot stronger, i mean frickin bullet proof. $.02 more to ya!!
--- End quote ---
or d300 or a STAK RAC
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version