The Mud Pit > Wrenching

has anyone put in a SYE??

(1/5) > >>

GreenGrandV8:
i was wonderin if anyone have installed SYE, and know how hard it is to do? cause in another month or 2 im gonna buy a 7" long arm kit and i would assume i willl need to do that got the lift. if you know anything let me know, thanks

Mr Rock:
I've done a few in a np231. Not that hard to do! once it's on the work bench about 30-45 minutes. You could also install it while the transfer case is still in but it's a little harder.

kirksjeep:
I have done several also.  I did my first one on a bench and all the rest on the Jeep.  On the bench is easier, but it is faster to just leave the NP231 in the Jeep.  You will need a heavy duty set of snap ring pliers to get the job done.  I just bought a new set from sears that are designed for the snap rings that are slit.  I think they were about $15, so not a big expense. 

Make sure you use a good quality gasket maker to prevent leaks and make sure all the wires will remain clear when done. 

Swagger:
Hey Rock, doesn't the V8 zj run the NP242?



GreenGrand-What brand lift kit/shocks you gonna run? Clayton? ;D FOX?  ;D

BlacXJeep:
i think its an np249

Navigation

[0] Message Index

[#] Next page