What did u get done this weekend?

[Flex]

I have seen these kinda threads on other forums and have decided to start one. So dont be lazy take some pictures and post um up and show off what u crafted up for ur rig.

Ill go first:

First of i took the old exhaust off and threw on duece's old flow master with no cat.



Then i hunted down the culprit to my leaky T-case.



It was the speedo o-ring.

[rocket]

scrubbed, cleaned, scuffed, taped-off, and wiped bed down w/ acetone in preps for Hurculiner (spent most of Sat doing that before going to Sailfest).  Will try to finish tomorrow night. 

[Flex]

Cool man lets see some pics when its all done.

[Mr Rock]

I welded in my rear shock mount extensions, installed the second dever spring plate and new u-bolts & hooked up the emergency brake cables!

Pics will be added in the future!

[Flex]

is this all on the new project ur doing?

[smaug1911]

Drove to Virginia, ate BBQ, went to a children's museum, ate cheeseburgers, went to Bass Pro Shop, watched 8 episodes of Glee!!!

[gearhead1985B]

i was on duty yeah and told duece his front axle was not broke

[BlacXJeep]

I asked adam stupid questions about my axle

[calvynandhobbs]

I went over to Ed's Saturday morning and welded in some plate for the trackbar on the axle side. While I was there and the welder was out he also welded in my front axle truss. Deathwobble is gone, but my Jeep is still loose. I really need to get all of the control arm bushings done soon, but it will have to wait until after Mohawk. Also replaced the sway bar disconnects.

[Mr Rock]

is this all on the new project ur doing?

All on the existing jeep!

I'm still in the "what should I do " process of the new project!!!!

[gearhead1985B]

is this all on the new project ur doing?

All on the existing jeep!

I'm still in the "what should I do " process of the new project!!!!

what is the new project

[kirksjeep]

Nothing got done of the YJ.  I changed oil in the Liberty and tried to make sure that it will have no problems while I'm out at sea. While I was in the garage I put some of my tools away and installed new master cylinder covers and a new laydown style tail light on the Harley.  I'm too lazy to post up pics.

[rocket]

1st coat on! Waiting for it to dry.

[rocket]

its 10:30 and the first coat is still a little tacky, would probably need another hour.  I'll just do it after work tomorrow; i have up to 24 hours to get the second coat on, so shouln't be a prob.

[moosin]

almost finished 8.8 and 4-link swap drivable just a few little things to finish!!!!!!!!!!!