Author Topic: Orvis Part Out  (Read 1700 times)

Offline zjorvis97

  • Mudd Hog
  • ***
  • Posts: 115
Orvis Part Out
« on: February 18, 2010, 08:04:01 PM »
I hate to do it, but i am parting out the ZJ. Its either a new motor for it, or a new jeep.

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Orvis Part Out
« Reply #1 on: February 18, 2010, 08:17:45 PM »
If everything else is in good shape and you like it you should just put a new motor in it. That will be much cheaper than buying another Jeep and then building it to what you want it to be. I've always like the looks of the Orvis edition.
1994 YJ on 37s

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Orvis Part Out
« Reply #2 on: February 18, 2010, 09:08:59 PM »
If everything else is in good shape and you like it you should just put a new motor in it. That will be much cheaper than buying another Jeep and then building it to what you want it to be. I've always like the looks of the Orvis edition.

If you need a motor, I have 4.0L out of an XJ!
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: Orvis Part Out
« Reply #3 on: February 18, 2010, 11:24:51 PM »
I believe he needs a V8.  look for a donor motor and keep the ZJ

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Orvis Part Out
« Reply #4 on: February 19, 2010, 01:41:50 AM »
what kind of aftermarket stuff is on ur jeep
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline zjorvis97

  • Mudd Hog
  • ***
  • Posts: 115
Re: Orvis Part Out
« Reply #5 on: February 19, 2010, 06:27:32 AM »
i am sure i have more aftermarket stuff then what the jeep is worth. I am looking for a rebuilt 5.2. i called a few shops but i am not going to spend $3,000 or more to get a new motor put in. I have already pulled the old one out. I just figure its going to cost about the same to have the old rebuild as it would to buy a rebuilt

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Orvis Part Out
« Reply #6 on: February 19, 2010, 04:23:48 PM »
I ran across this on Craigslist this morning. Says he has a good running 5.2 out of ZJ with 141k miles.

http://newlondon.craigslist.org/pts/1606759211.html

1994 YJ on 37s

Offline zjorvis97

  • Mudd Hog
  • ***
  • Posts: 115
Re: Orvis Part Out
« Reply #7 on: March 29, 2010, 12:22:15 AM »
I got a new engine into the ZJ, not running quite yet but its got 75,000 miles on it so i would hope it does. Just a few more wires and new oil and we should be wheelin again. However i have moved back to PA and am no longer in the CG, not my choice and as some of you know you military careers can be made or ruined by the wrong person. I was not so lucky in that department. I hope to get back up to CT this summer do to some wheeling. Also, if anyone wants to come down to the PA Jeep show in July i have some land that can be used for wheeling/ camping.