Author Topic: bumper  (Read 21942 times)

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: bumper
« Reply #75 on: January 31, 2008, 04:05:05 AM »
Dang it!  I have basketball tomorrow night.  Good luck guys, I hope it works out better this time.
Axle:  2
Nemesis: 1

I win!

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: bumper
« Reply #76 on: January 31, 2008, 04:06:52 AM »
Sounds good to me ... I'm dying for some more of that winter brandy cask beer.
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: bumper
« Reply #77 on: January 31, 2008, 04:13:20 AM »
Damn Alki's! 




 ;D
Axle:  2
Nemesis: 1

I win!

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: bumper
« Reply #78 on: January 31, 2008, 04:13:39 AM »
hell yeah!
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: bumper
« Reply #79 on: January 31, 2008, 04:43:56 AM »
:D

I'll make sure to have a couple for you, Justin! 

Any one else want to join us last minute dudes?  ;)
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline CnoteTJ

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 475
    • Facebook
Re: bumper
« Reply #80 on: January 31, 2008, 04:54:28 AM »
would love to help, but there is a birthday party i have to attend in plainfield that will last till 7-8ish, i assume yall be done by then
2011 Black Jeep Wrangler Rubicon
4" FT Long Arm w/ CRC link and 35" MTR/K's
Some armor and performance goodies!

www.northridge4x4.com    www.offroadevolution.com   www.full-traction.com

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: bumper
« Reply #81 on: January 31, 2008, 05:04:02 AM »
Any one else want to join us last minute dudes?  ;)

*Just grins* That's so frickin hilarious. Scott said if he gets out of work early enough, he might head up. And if my brain matter is oozing out of my ears, I might head up too just to clear my mind a little from studying.

I can take pictures? You don't want me touching a wrench LMAO.

We'll see. If we are there, then we made it. If not *grins* then not.
~J.D.~
"When life gets too hard to stand....crawl."

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: bumper
« Reply #82 on: January 31, 2008, 12:15:29 PM »
Any one else want to join us last minute dudes?  ;)

*Just grins* That's so frickin hilarious. Scott said if he gets out of work early enough, he might head up. And if my brain matter is oozing out of my ears, I might head up too just to clear my mind a little from studying.

I can take pictures? You don't want me touching a wrench LMAO.

We'll see. If we are there, then we made it. If not *grins* then not.

That would be awesome if you can take pics!  I nearly forgot to even have my camera in the garage, i was so excited about finaly getting it on.  Besides, i think you take better pics than i do.

And if you dont' make it, no worries.

I'm gonna shoot for 5ish again.  if you want me to call you when i'm headed home, let me know and i will. 

burgers/beer, or pizza/beer or go to main st cafe (first round or two will be on me)?
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: bumper
« Reply #83 on: January 31, 2008, 02:26:05 PM »
I'm gonna shoot for 5ish again.  if you want me to call you when i'm headed home, let me know and i will. 
burgers/beer, or pizza/beer or go to main st cafe (first round or two will be on me)?

1) fivish works for us.
2) I will have the girls (setting them up in your lower level to watch TV  ;D )
3) I am good for eating out or in, just gotta make sure we can take kids in, if not we'll work around it.
4) where the hell do you live again? Directions please!  ;) I lost em when the old forum went down.
~J.D.~
"When life gets too hard to stand....crawl."

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: bumper
« Reply #84 on: January 31, 2008, 02:57:01 PM »
Worst case scenario Jeremy, we can just weld it on!!  ;D :P

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: bumper
« Reply #85 on: January 31, 2008, 03:25:25 PM »
if it weren't for the fact that the bumper is powercoated, i'd ask for the brackets to be welded to the bumper.  But since it is, i'll just use 4 grade-8 bolts per bracket.
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: bumper
« Reply #86 on: February 01, 2008, 03:29:50 AM »
THANK YOU SO MUCH AL, SCOTT, AND JD!!  Its finally on and it looks AWESOME!!!!!!  all i need now is a winch to fill the gap :)  My photo site is down for backup, so once its back up tomorrow, i'll post pics.  Thanks JD for taking all the pics!

Now i dont' have to listen to "duct tape" jokes at the gate. ;D
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: bumper
« Reply #87 on: February 01, 2008, 03:51:22 AM »
sweet i would have ben good for wed.

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: bumper
« Reply #88 on: February 01, 2008, 03:53:40 AM »
 ;)
~J.D.~
"When life gets too hard to stand....crawl."

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: bumper
« Reply #89 on: February 01, 2008, 12:00:28 PM »
pics are uploading now, i'll post the link adn a couple pics in a few hours
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work