Author Topic: Ford 8.8 axle swap  (Read 34020 times)

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: Ford 8.8 axle swap
« Reply #210 on: April 18, 2008, 03:48:04 AM »
I found fifth gear!!!  It was hiding somewhere in my transmission, and now that I have 4.88's, it came out of hiding!  It took nearly 3 hours to get home from CTAxle.  I had to keep it at or below 60mph the whole way, and I had to stop every 15 to 20 miles to let the gears cool down.  The speedo is better than it was with the 3.73's, only now it reads about 7 over at 60mph instead of 10 under.  I have to route the wires and switches for the lockers tomorrow.  I climbed up a steep dirt mound with just the limited slip...  Crawled right up it without me giving any pedal.  Everything is so much smoother now.  Pete found that the 8.8 pinion was warped a little, which is what was giving me so much slop in my rear drive train.  Up front, with the new outter axle seals (like the ones One-eye has), and the new u-joints, the steering was much stiffer.  Overall, SUPER happy about it.  Pete was awesome and was a pleasure to work with.
Axle:  2
Nemesis: 1

I win!

Offline mallcrawl

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 502
Re: Ford 8.8 axle swap
« Reply #211 on: April 18, 2008, 05:03:19 PM »
cool beans

Offline Doball

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 353
Re: Ford 8.8 axle swap
« Reply #212 on: April 19, 2008, 01:25:13 AM »
  I had to keep it at or below 60mph the whole way, and I had to stop every 15 to 20 miles to let the gears cool down. 

Next mod.....A tranny cooler out of a (cough, hack, spit......) tuner  ;)

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: Ford 8.8 axle swap
« Reply #213 on: April 19, 2008, 01:43:50 AM »
Done!  Completely, totally, done.  Hooked up both lockers today.  I can't wait to try them out.


May this ridiculously long thread rest in peace.   ;D
Axle:  2
Nemesis: 1

I win!

Offline Gastank

  • Honorary Member
  • Mudd Hog
  • ***
  • Posts: 199
  • HORSEPOWER: A TIRE BURNING GOOD TIME!
Re: Ford 8.8 axle swap
« Reply #214 on: April 20, 2008, 08:45:21 AM »
Rest in Pieces
91 YJ, 350cid/TH400/231 4.5 RE springs, 2" Bonz shackles, 33/12.5/15 MT baja claws, and lock-rite in the rear.
"But it is better to fail in originality than to succeed in imitation." - Herman Melville