Cheap fix for a common problem

[kirksjeep]

After reading on the members side about Steve busting his drive shaft I posted up a cool/cheap way to help prevent the problem of breaking the bolts that secure the straps holding the U-joint. Before my 8.8 swap I snapped the same bolt and had to replace my U-joint too. 

Here is a cool part and write up that eliminates the straps:
http://www.jeepaholics.com/tech/ujointconv/ujointconv.htm

Here is another part number for Spicer brand:
http://www.northerndrivetrain.com/product/SPI-2-94-58X.html

[BlacXJeep]

sweet I'll do this when I change mine

[yj93]

Just FYI, be careful when doing this modification, the U-bolts can be tightened unevenly and cause the u-joint to wear pre-maturely.

Other than that and rust issues, they work beautifully in my YJ...

[kirksjeep]

I was looking through the 4wd hardare catolog today and they cary the U-bolts, but for about $12 a set.  This will only work for the rear axle and it does require drilling.   For the D30 you have to buy a differnt Pinion ($44?) and the U-bolt kit.  The back of theD30  pinion does not have enough room for the nuts.