Author Topic: shifting sound!?!?  (Read 1753 times)

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
shifting sound!?!?
« on: March 11, 2009, 04:00:36 AM »
Ever since that day up in Mass few weeks ago, I have had a strange shifting noise.

Only on up-shifting and not all the time.
But there is a low-pitched rumble/grind sound that lasts about 1 second.
There is also a similar sound at startup that lasts about 2+ seconds.

This is an auto tranny.

any ideas?

97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

PaulW

  • Guest
Re: shifting sound!?!?
« Reply #1 on: March 11, 2009, 04:05:22 AM »
Ever since that day up in Mass few weeks ago, I have had a strange shifting noise.

Only on up-shifting and not all the time.
But there is a low-pitched rumble/grind sound that lasts about 1 second.
There is also a similar sound at startup that lasts about 2+ seconds.

This is an auto tranny.

any ideas?



loose nut behind the wheel??

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: shifting sound!?!?
« Reply #2 on: March 11, 2009, 08:27:50 PM »
HA HA  >:(

Yes...I am paying for it.
 
97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

Offline phoenix

  • Mudd Hog
  • ***
  • Posts: 136
Re: shifting sound!?!?
« Reply #3 on: March 11, 2009, 10:04:33 PM »
So you're not going this weekend I take it? ;D

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: shifting sound!?!?
« Reply #4 on: March 12, 2009, 01:50:56 AM »
I'd start with the simple things first like chaging the fluid and filter.  Depnding on how old the current fluid is, you also might want to consider forking over the extra $$$ and having a shop do a complete flush and get all of the old fluid out.  I have been amazed at the differnce after a simple fluid change.  I am also a fan of Lucus Transmission stuff. 
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

PaulW

  • Guest
Re: shifting sound!?!?
« Reply #5 on: March 12, 2009, 02:35:57 AM »
im an ase retired master tech pm me for a test drive and i'll give you a good idea whats wrong.

Offline smaug1911

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 473
Re: shifting sound!?!?
« Reply #6 on: March 12, 2009, 03:10:38 AM »
PM sent to PaulW.

No wheeling for a little while. Too much work/travel and want to know what my truck is doing first.

97 V6 Tacoma TRD. 2.5" front coil spacers. 3.5' Downey leaf springs, 2" 4Crawler body Lift, rear Bilstein 5125's, 35" BFG KM2's, Skid row transfer skid, Ocean State Crawlers front winch bumper, custom rear bumper, Kajobuilt sliders, deckplate mod, grey wire mod, Smittybilt XRC8.

PaulW

  • Guest
Re: shifting sound!?!?
« Reply #7 on: March 12, 2009, 07:20:47 PM »
PM sent to PaulW.

No wheeling for a little while. Too much work/travel and want to know what my truck is doing first.



pm returned

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: shifting sound!?!?
« Reply #8 on: March 16, 2009, 03:45:32 AM »
ok Brian,

so i have the same thing as well going on, the syncros are going bad in your tranny. (which (simplified) helps ease shifting of gears)it all depends on how you shift your gears as to when you need to replace it. no matter what, they are going bad/getting worn gown. but you can extend the repair process by at least a year. (so far for me) i can show you, it is easier to show you than describe it.

plus when you come over, i can do your d-rings.