Author Topic: TJ Tie Rod repair/upgrade  (Read 4394 times)

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
TJ Tie Rod repair/upgrade
« on: June 08, 2008, 01:24:23 AM »
So as all of you know, I bent the SNOT :-\ out of JD's tie rod in Mohawk 2 weeks ago. Fortunately, we scored a used one someone had with them on the trail to make the fix and keep going. After we got back I immediately began looking into a real replacement sturdy enough to avoid bending it again. What I found out was that the '98 Grand Cherokee's with the V8 have a pretty beefy one that fits the TJ quite nicely. The ends are the same but have  :o 7/8" threaded ends instead of the stock 5/8" (I think). All the heavy duty ones you can buy are going to be about 1 1/4" or 1 1/8" tube with a 1/4" thick wall. Strong but not as strong as a solid rod like the Grand's. Also, a stock tie rod adjusts on both ends where as the Grands has one fixed end(drag link-passenger side) and just the other side to adjust.

If anyone is looking for a stout upgrade the NAPA part numbers are:
NAPA NCP 2696085 (long passenger side)
NAPA NCP 2692788 (driver side tie rod end)
NAPA NCP 2691134 (Adjusting Sleeve)

From the Groton NAPA with the military discount, $146 out the door. Any off road purpose heavy duty rods are going to run you $189 or more. And this is much stronger....

Offline CaptORM

  • Rock Crawler
  • ****
  • Posts: 497
    • JT 4X4
Re: TJ Tie Rod repair/upgrade
« Reply #1 on: June 09, 2008, 01:51:10 PM »
Scott...Your set up and mine are the same.  I have the 1-ton system out of a dodge dakota.  which is a direct fit for my setup.  Its pretty much the same thing that is in the V-8 Grands.  So you may want to do the research about the dakota to see if you can use it.  May be cheaper...
I do cheeks for free just ask...
 
 l  
 l _[==]__o___o
 l//_|__l__l,\___\,___
 l_--\__\__l_/---\_[] llll [)
  (o)_)        (o)_)--o)_)



96 Jeep Grand Cherokee
6.5" lift, 33's

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: TJ Tie Rod repair/upgrade
« Reply #2 on: June 09, 2008, 02:19:29 PM »
Too late  ;D Already purchased and installed ;) Thanks though!
~J.D.~
"When life gets too hard to stand....crawl."

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: TJ Tie Rod repair/upgrade
« Reply #3 on: June 10, 2008, 04:54:38 PM »
I read on another site that you can get some pipe from Lowes/HD and slip it over the existing tie rod.  The specs were as follows  32.5' long  1 1/8" OD and .885" ID.  Thats for a straight tie rod.  Some were using slightly larger OD/ID for already bent tie rods(trail fix)  This might be a inexpensive item to have when wheeling.

Offline CnoteTJ

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 475
    • Facebook
Re: TJ Tie Rod repair/upgrade
« Reply #4 on: June 10, 2008, 05:19:41 PM »
or just use the handle from a high-lift jack, its perfect for it 8)
2011 Black Jeep Wrangler Rubicon
4" FT Long Arm w/ CRC link and 35" MTR/K's
Some armor and performance goodies!

www.northridge4x4.com    www.offroadevolution.com   www.full-traction.com

Offline CaptORM

  • Rock Crawler
  • ****
  • Posts: 497
    • JT 4X4
Re: TJ Tie Rod repair/upgrade
« Reply #5 on: June 10, 2008, 06:45:29 PM »
yet another one of the hundereds of uses for a high lift.   

Breaking someones face is the best though.
I do cheeks for free just ask...
 
 l  
 l _[==]__o___o
 l//_|__l__l,\___\,___
 l_--\__\__l_/---\_[] llll [)
  (o)_)        (o)_)--o)_)



96 Jeep Grand Cherokee
6.5" lift, 33's

Offline mallcrawl

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 502
Re: TJ Tie Rod repair/upgrade
« Reply #6 on: June 11, 2008, 07:43:51 PM »
nice info I'll have to look into it soon as I start getting paid along with the v8 durango stearing box

Offline CnoteTJ

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 475
    • Facebook
Re: TJ Tie Rod repair/upgrade
« Reply #7 on: June 11, 2008, 11:48:51 PM »
is that supposed to be a direct swap too?
2011 Black Jeep Wrangler Rubicon
4" FT Long Arm w/ CRC link and 35" MTR/K's
Some armor and performance goodies!

www.northridge4x4.com    www.offroadevolution.com   www.full-traction.com

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: TJ Tie Rod repair/upgrade
« Reply #8 on: June 12, 2008, 01:50:57 PM »
From what I've read the durango steering box is a direct fit.  Who's up for a junkyard fieldtrip?

Offline Kral4me

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1159
Re: TJ Tie Rod repair/upgrade
« Reply #9 on: June 12, 2008, 02:23:52 PM »
From what I've read the durango steering box is a direct fit.  Who's up for a junkyard fieldtrip?

I think everyone should be up for that kinda trip, considering we have another run to M here coming up soon lol...SPARE PARTS ARE A MUST PEOPLE!!!  ;)
~J.D.~
"When life gets too hard to stand....crawl."

Offline mallcrawl

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 502
Re: TJ Tie Rod repair/upgrade
« Reply #10 on: June 12, 2008, 06:00:32 PM »
From what I've read the durango steering box is a direct fit.  Who's up for a junkyard fieldtrip?

I've got a realy good writeup on the swap somewhere, its a bolt up thing provided you get the right stearing box

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: TJ Tie Rod repair/upgrade
« Reply #11 on: June 13, 2008, 07:33:08 PM »
when are we planning on going to the yards?
Living in Preston. Call me if you're going wheeling!

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: TJ Tie Rod repair/upgrade
« Reply #12 on: June 13, 2008, 08:12:30 PM »
I don't even know where there is a junkyard around here    :-[ ...

Offline CnoteTJ

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 475
    • Facebook
Re: TJ Tie Rod repair/upgrade
« Reply #13 on: June 13, 2008, 08:38:09 PM »
i heard there was one out in waterford but i cant find any information on it  >:(
2011 Black Jeep Wrangler Rubicon
4" FT Long Arm w/ CRC link and 35" MTR/K's
Some armor and performance goodies!

www.northridge4x4.com    www.offroadevolution.com   www.full-traction.com

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: TJ Tie Rod repair/upgrade
« Reply #14 on: June 13, 2008, 09:58:02 PM »
there's one at exit 69 north?
i dont remember the name of it..

also M&J Auto Recycling i've been told. Their number is 860 537 5002
Living in Preston. Call me if you're going wheeling!