Author Topic: BigDaddyNandez Taco  (Read 318 times)

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 600
BigDaddyNandez Taco
« on: November 16, 2017, 06:57:18 PM »
Hey everyone,
  Some of you already know that Adriel, BigDaddyNandez, was in an motorcycle accident around labor day and had lost his vision. He unfortunately will no longer be able to drive and will need to sell his Toyota Crawler. He tells me that he needs to get around $15k.... If somebody is interested let me know and I can get info to him. The axles have just been rebuilt over the summer and has yet to hit the trails.
Chuck
« Last Edit: November 16, 2017, 06:58:54 PM by Big Chuck »
1989 YJ on a 78 K10 chassis that has been bobbed in the middle. Chevy crate 350 mated to a T400 with a reworked NP203. 14 bolt full floating rear with a Detroit locker, Dana 60 chromo shafts with a lockrite locker. Roll cage, skid plate. 15 gallon fuel cell in the back. Needs some stuff....

Offline toreadorranger

  • Paid Members
  • Mudd Hog
  • ***
  • Posts: 235
Re: BigDaddyNandez Taco
« Reply #1 on: November 16, 2017, 08:58:16 PM »
If you can get some photos and a rough list of parts I can help spread the word around on it. 

Offline calvynandhobbs

  • BOD
  • Trail Master
  • *****
  • Posts: 3039
Re: BigDaddyNandez Taco
« Reply #2 on: November 16, 2017, 09:56:30 PM »
If he sits on this too long should we consider helping him take it apart to part it out. I have the feeling he has some good, expensive parts in that rig, but it's not a combination or type of rig that I would be interested in. Like Andrew said though, if we can get some pictures and specs on it and some of its parts we'd be able to post it up on different boards that we are all on.
1994 YJ on 37s

Offline JKJon

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 342
Re: BigDaddyNandez Taco
« Reply #3 on: November 16, 2017, 10:33:53 PM »
OMG... This is really sad news.

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 828
Re: BigDaddyNandez Taco
« Reply #4 on: November 17, 2017, 01:10:07 AM »
Thought and prayers go out to him and his family.
I will ask around. Need some pics and specks
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline JKSue

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 286
Re: BigDaddyNandez Taco
« Reply #5 on: November 17, 2017, 01:42:01 AM »
OMG thats awful. :(

Offline Toddt

  • Paid Members
  • Trail Passenger
  • ***
  • Posts: 13
Re: BigDaddyNandez Taco
« Reply #6 on: November 17, 2017, 01:48:51 AM »
That is terrible news.   My sympathies go out to him and his family. If there is anything he or his family needs please don't hesitate to ask .
I am sad to hear this.   ☹️
If your gonna be dumb , you gotta be tuff

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 600
Re: BigDaddyNandez Taco
« Reply #7 on: November 17, 2017, 09:44:46 PM »
Audriel is in California right now on vacation with his brother. Below is something I found on the board about the Taco....

98 Tacoma. It's my offroad only trailer queen rock crawler. 4x4, v8(2uzfe), 1 ton solid axles, 4 link front and rear, 42" iroks, on coil overs.
1989 YJ on a 78 K10 chassis that has been bobbed in the middle. Chevy crate 350 mated to a T400 with a reworked NP203. 14 bolt full floating rear with a Detroit locker, Dana 60 chromo shafts with a lockrite locker. Roll cage, skid plate. 15 gallon fuel cell in the back. Needs some stuff....