Author Topic: 89 f250 w/ plow  (Read 1862 times)

Offline bigdaddynandez

  • Honorary Member
  • Trail Queen
  • ***
  • Posts: 64
89 f250 w/ plow
« on: January 14, 2017, 05:40:23 PM »
You guys get first dibs, 89 f250 gas 4x4, frame is trashed but the bed and cab are in excellent shape, plow is brand new, 8ft wide. Let me know if you're interested

Offline Big Chuck

  • President
  • Trail Master
  • *****
  • Posts: 725
Re: 89 f250 w/ plow
« Reply #1 on: January 15, 2017, 04:00:21 AM »
What axles and ratio?
Tube chassis, 5.3LS, Ford Dana 60 Chevy 14 Bolt 5.13 gears. 203/205 doubler, Hydro steering, air shocks, 42 inch Iroks on 16.5 H1 double bead locks.

Offline toreadorranger

  • Paid Members
  • Mudd Hog
  • ***
  • Posts: 235
Re: 89 f250 w/ plow
« Reply #2 on: January 15, 2017, 05:38:16 PM »
Should be D44HD/D50 TTB up front and a sterling 10.25 in the rear.

Offline bigdaddynandez

  • Honorary Member
  • Trail Queen
  • ***
  • Posts: 64
89 f250 w/ plow
« Reply #3 on: January 15, 2017, 05:41:58 PM »
What axles and ratio?
Idk the gear ratio, Im assuming 3.55, and it's a Dana 50 ttb front axle, sterling 10.25 rear

Offline toreadorranger

  • Paid Members
  • Mudd Hog
  • ***
  • Posts: 235
Re: 89 f250 w/ plow
« Reply #4 on: January 15, 2017, 10:52:56 PM »
What axles and ratio?
Idk the gear ratio, Im assuming 3.55, and it's a Dana 50 ttb front axle, sterling 10.25 rear

Check the hub diameter on the front,  I thought they were all D50's but my 88 had a HD D44.  D50 fronts weren't standard till the 90s.  If it is a D50, some of the parts will cross over to a Dana 60, so it might be worth parting it.

Offline bigdaddynandez

  • Honorary Member
  • Trail Queen
  • ***
  • Posts: 64
Re: 89 f250 w/ plow
« Reply #5 on: January 15, 2017, 10:58:31 PM »
What axles and ratio?
Idk the gear ratio, Im assuming 3.55, and it's a Dana 50 ttb front axle, sterling 10.25 rear

Check the hub diameter on the front,  I thought they were all D50's but my 88 had a HD D44.  D50 fronts weren't standard till the 90s.  If it is a D50, some of the parts will cross over to a Dana 60, so it might be worth parting it.
Im positive it's a 50, what parts cross over to 60? Extra parts to take on the trail would be awesome