What did u get done this weekend?

[zjchef25]

Thank you to nates roommate and nate for selling me there bumper... its almost done and should be mounted this weekend.  grinding all of the old welds and making it better stronger and and beefier with winch capabilities

[gearhead1985B]

I drove it

[footman]

Rode my motorcycle to Norwalk Ohio (1300  total miles) and got nitro blasted by John Force

[WillC]

Rode my motorcycle to Norwalk Ohio (1300  total miles) and got nitro blasted by John Force

Did he break 300mph?

[zjchef25]

I drove it

you drove what?

[footman]

He was right at 300 mph.   

[rweaver138]

put my protofab front winch bumper on that i won, as well as inner steering box brace




cut and fold with the 35's

[gearhead1985B]

I drove it

you drove what?

my jeep the first time since april i have drove with a mostly complete rig over 60mph the inital test went very good concidering i did not ballance the tires and had no rear shocks i need a antiwrap bar (stupid UPS loosing my parts again) and to install the rear shocks and move the rear shackle hanger and then lower the jeep 2" minimum i would like 3" i don't like the fact i can clear 4d's and don't have the axles to handle them i need a front hp d60

[gearhead1985B]

I got my anti wrap bar built and started working on my exhaust i will be all 2.5 inch from the manafold back and it will wrap around the oil pan like a tj and dump out over top the frame right behind the passenger door i need to route it this way so i am not having to worry about melting any bushing for the anti wrap bar or the rear shocks and the flat skid makes it a pita to mount any normal sized muffler next to the tranny so i an looking for a small quite muffler that i can stuff in the small space that i have left

and the guy at napa now calls my Jeep frankenJeep

[BlacXJeep]

I got my anti wrap bar built and started working on my exhaust i will be all 2.5 inch from the manafold back and it will wrap around the oil pan like a tj and dump out over top the frame right behind the passenger door i need to route it this way so i am not having to worry about melting any bushing for the anti wrap bar or the rear shocks and the flat skid makes it a pita to mount any normal sized muffler next to the tranny so i an looking for a small quite muffler that i can stuff in the small space that i have left

and the guy at napa now calls my Jeep frankenJeep

you should paint it green and put some large bolts sticking out of the sides

[gearhead1985B]

Put my $350 drive shaft in the mail heading back to high angle drive line after i twisted off the yoke

[BlacXJeep]

Put my $350 drive shaft in the mail heading back to high angle drive line after i twisted off the yoke

only you Adam

[Mr Rock]

replaced a broken rear leaf spring (good thing I replaced both fronts when i broke one of them at OFR) swapped all the tie rods from the project jeep to the black one and cured the DW.

Going to test it out today!

[WillC]

Installed a CB and antenna.





Had to test it out, so went wheeling with Rock,  CB worked fine.