Author Topic: Going to by tires trying to settle on rim size.  (Read 2662 times)

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Going to by tires trying to settle on rim size.
« on: June 10, 2010, 01:14:24 AM »
So im soon to buy new tires bc the ones i have are falling apart and blowing up on me, not good. But the question is should i get a different rim size and if so which size, and just to answer a question before its asked the tire size is 36"
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Going to by tires trying to settle on rim size.
« Reply #1 on: June 10, 2010, 01:35:27 AM »
So im soon to buy new tires bc the ones i have are falling apart and blowing up on me, not good. But the question is should i get a different rim size and if so which size, and just to answer a question before its asked the tire size is 36"

what bolt pattern are  you running what type of tire are you putting on a tire with a stiff side wall will warrent a smaller rim and tires for a 15" are cheaper than a 17" i would stay away from 16" cause it looks like they are dieing breed when it comes to offroad tires but there is always a lot of tire selection for the 16.5" wheel
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Going to by tires trying to settle on rim size.
« Reply #2 on: June 10, 2010, 01:53:06 AM »
So im soon to buy new tires bc the ones i have are falling apart and blowing up on me, not good. But the question is should i get a different rim size and if so which size, and just to answer a question before its asked the tire size is 36"

what bolt pattern are  you running what type of tire are you putting on a tire with a stiff side wall will warrent a smaller rim and tires for a 15" are cheaper than a 17" i would stay away from 16" cause it looks like they are dieing breed when it comes to offroad tires but there is always a lot of tire selection for the 16.5" wheel

still running the standard 5x4.5, Im going to be running radial irocs and my only reason for not just staying with a 15" rim is if at some point i go to a Dana 60 i would like to avoid having to grind the calipers down to allow the 15" rim to fit. I do realize the bolt pattern will change, which means new rims, but i dont want to have to by new tires also. Also if i go with 17" rims how much back spacing should i go with 2.5" or 4.25" im leaning towards 4.25" so my rig stays closer to the street legal side of the road.
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Going to by tires trying to settle on rim size.
« Reply #3 on: June 10, 2010, 04:32:37 AM »
I've never looked at 17" rims, but there have to be some out there in betweene 2.5" and 4.25" backspacing, aren't there. I have 4" backspacing on my TJ and I like the stance. How wide are you going to go in the Irocs? Are they going to be 12.5" or 13.5" wide. If you go wider than 12.5" you'll have to have more backspacing so you don't rub your front control arms during turns. I would say a 3.5"-4" backspacing would be perfect. I have to agree with Adam that the 16" wheels were a quick phase and I'm not seeing many of those around anymore in the way of tire selection.
1994 YJ on 37s

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Going to by tires trying to settle on rim size.
« Reply #4 on: June 10, 2010, 04:40:45 AM »
So im soon to buy new tires bc the ones i have are falling apart and blowing up on me, not good. But the question is should i get a different rim size and if so which size, and just to answer a question before its asked the tire size is 36"

what bolt pattern are  you running what type of tire are you putting on a tire with a stiff side wall will warrent a smaller rim and tires for a 15" are cheaper than a 17" i would stay away from 16" cause it looks like they are dieing breed when it comes to offroad tires but there is always a lot of tire selection for the 16.5" wheel

still running the standard 5x4.5, Im going to be running radial irocs and my only reason for not just staying with a 15" rim is if at some point i go to a Dana 60 i would like to avoid having to grind the calipers down to allow the 15" rim to fit. I do realize the bolt pattern will change, which means new rims, but i dont want to have to by new tires also. Also if i go with 17" rims how much back spacing should i go with 2.5" or 4.25" im leaning towards 4.25" so my rig stays closer to the street legal side of the road.

get a set of 17" or 16.5" if you want 60's i recomend the 16.5" for the 60's cause you can get recentered h1 bead locks for pretty cheap then you can get what ever back spacing you want but if buying now since you only want to chage rims i say 17" with a 3" bs if you can find it to help with the tire clearance on turning or get a good set of wheel spacers  if you plan on the 36x13.5x17 i recomend at least a 9" rim i run my 33x13.5x15 toyo's on a 15x8" with a 4" bs and i run less than 30lbs they rub and i cant really addjust the steering stops any more due to lack of threads but in order to get a flat tread pattern i need 22lbs in the rear and 24lbs in the front

for the bolt pattern if you convert to 5x5.5 you will not have to change out the wheels beccause a d60 an be converted over using a combination of ford/chevy parts

but the descion is up to you this is only my recomendations


« Last Edit: June 10, 2010, 09:52:06 AM by gearhead1985B »
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Going to by tires trying to settle on rim size.
« Reply #5 on: June 11, 2010, 04:04:55 AM »
Ok so i think i have come to the conclusion im just gonna stick with the 15X10 rims bc in all honesty if i end up going to a dana 60 ill prob get bigger tires, and if not ill just shave the calipers down, they say there r negative effects with the shaving. Thanks for all the input guys!
« Last Edit: June 11, 2010, 04:08:33 AM by Flex »
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Going to by tires trying to settle on rim size.
« Reply #6 on: June 11, 2010, 03:34:17 PM »
I do not think there will be a side effect me shaving the caliper when i had the 44 60 combo i was going to rebuild a 15 would not fit at all so watch out and do lots of research
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Going to by tires trying to settle on rim size.
« Reply #7 on: June 11, 2010, 06:09:53 PM »
yea all the guys on pirate say u have to take about an 1/8" off the caliper in some spots but they say the calipers are so stout there is no ill effects, but like i said before if i end up going to a dana 60 ill prob. be getting bigger tires any way so, this really isnt to big a deal, but hopefully the dana 30 will hold up for a while i dont plan on locking it to soon and its a HP with a truss and the 760 u joints. So its a much as u can really polish the dana 30 turd with out chromoly shafts.
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Going to by tires trying to settle on rim size.
« Reply #8 on: June 12, 2010, 05:38:10 AM »
another thing i just thought of is that you can get military h1 tires and rims for cheap if you wanted to go that route
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Going to by tires trying to settle on rim size.
« Reply #9 on: June 12, 2010, 02:41:20 PM »
where from? at one point i almost got some but then my connection fell threw.
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline WillC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 722
Re: Going to by tires trying to settle on rim size.
« Reply #10 on: June 12, 2010, 02:46:51 PM »
If I see anyone selling them at the show today I'll get a phone # but 16.5 wheels will limit your tire choices.
« Last Edit: June 12, 2010, 02:52:53 PM by WillC »

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: Going to by tires trying to settle on rim size.
« Reply #11 on: June 12, 2010, 02:55:40 PM »
I wish I was air force ground maintenance I would totally hook everyone up
Andy Doucette - A.K.A.(Douce)
W.O.J.

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Going to by tires trying to settle on rim size.
« Reply #12 on: June 12, 2010, 03:06:21 PM »
If I see anyone selling them at the show today I'll get a phone # but 16.5 wheels will limit your tire choices.

yea will if u could do that it would be awesome. Thanks man.
2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline Flex

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 772
Re: Going to by tires trying to settle on rim size.
« Reply #13 on: June 23, 2010, 03:31:45 AM »
Tires got here today!!!!!

2000 XJ Sport 6.5 inch TNT Longarms, 36" IROK Radials, HP dana 30, Ford 8.8 aussie locker, 4.10s, front bumper with stinger and 9500 mile maker winch, Rock Sliders, OBA. full exo cage, chopped.
2005 F-150

-Nate

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Going to by tires trying to settle on rim size.
« Reply #14 on: June 23, 2010, 06:55:35 AM »
Tires got here today!!!!!



idk if those will work you should send them to me to test for you i normally charge for test ing of products but for you i will do it for free just get them to me in florida

they look sick
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/