« previous next »
Pages: [1] 2   Go Down

Author Topic: New project!!  (Read 3017 times)

PaulW

  • Guest
New project!!
« on: January 23, 2009, 08:35:56 PM »
Well got this bitch cheap cuz a tree fell on it.  I actually have a clean title for it.  Hmm  how fun is this going to be.  I think some sawzall/welder/bender time is in order.  No lift, just sawzall, 33's, weld rear diff, small cage for good luck, and beat the snott out of it!!



Logged

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: New project!!
« Reply #1 on: January 23, 2009, 08:41:55 PM »
is that a cherikee or bronko?
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: New project!!
« Reply #2 on: January 23, 2009, 08:44:54 PM »
xj
Logged

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: New project!!
« Reply #3 on: January 23, 2009, 08:49:44 PM »
its gonna be fun!
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: New project!!
« Reply #4 on: January 23, 2009, 09:06:41 PM »
Quote from: rocket on January 23, 2009, 08:49:44 PM
its gonna be fun!

I love the $500 beaters you dont have to worry about.  since it's a 2 door i have plenty of room for fender trimming.  it's got the 29 spline 8.25 in it all ready so all i have to do is weld it :D.  i'm hoping to keep the entire cost under 1200.  should be fairly capable when i'm done.  i already took the sway bars out and it flexes pretty good for a stock pos.
Logged

Offline RnnngTrails

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 702
    • Facebook - Gary Lynch
Re: New project!!
« Reply #5 on: January 23, 2009, 09:32:59 PM »
you're going to fit 33s w/ no lift? how much are you going to cut??
Logged
Living in Preston. Call me if you're going wheeling!

PaulW

  • Guest
Re: New project!!
« Reply #6 on: January 23, 2009, 09:34:19 PM »
Quote from: RnnngTrails on January 23, 2009, 09:32:59 PM
you're going to fit 33s w/ no lift? how much are you going to cut??
The entire roof :D
Logged

Offline Seabee_BUC

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1106
  • Yeah she's fast...Terrible in the rocks I'm sure!
Re: New project!!
« Reply #7 on: January 24, 2009, 12:30:14 AM »
Just tube as much of it out as you can! Exo!
Logged

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: New project!!
« Reply #8 on: January 24, 2009, 12:34:38 AM »
You'll want to cage in as much as you can and strengthen the floors. Being that it's a unibody it needs something to keep it from twisting. I have seen a pic of a guy that cut the top off an XJ without doing any strengthening and brought it up an RTI ramp. When he came back down the body didn't go back to straight at all and the whole thing had twisted in the middle like a pretzel.
Logged
1994 YJ on 37s

Offline Axle

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 2008
  • Merica!!!
Re: New project!!
« Reply #9 on: January 24, 2009, 02:25:09 AM »
Outstanding!
Logged
Axle:  2
Nemesis: 1

I win!

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: New project!!
« Reply #10 on: January 24, 2009, 02:46:51 PM »
well call it the "Albino Pretzel!!!
Logged

PaulW

  • Guest
Re: New project!!
« Reply #11 on: January 24, 2009, 07:07:41 PM »
I have a lot of 1.75" dom that i'm using for the cage.  the cage is going to be trial and error, and hopefully i'll get good enough with the bender to make one look nice.  i bought a tubing notcher and everything last week.
Logged

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: New project!!
« Reply #12 on: January 25, 2009, 05:31:16 AM »
Sweet!  You gotta let me at it w/ the sawsall!  I'm pretty good w/ one (just look at my truck)
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

PaulW

  • Guest
Re: New project!!
« Reply #13 on: January 25, 2009, 06:56:40 PM »
Quote from: rocket on January 25, 2009, 05:31:16 AM
Sweet!  You gotta let me at it w/ the sawsall!  I'm pretty good w/ one (just look at my truck)

hahaha.  going to hack the roof with a circular saw.  want nice pretty straight lines.
Logged

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: New project!!
« Reply #14 on: January 25, 2009, 11:05:44 PM »
Quote from: PaulW on January 25, 2009, 06:56:40 PM
Quote from: rocket on January 25, 2009, 05:31:16 AM
Sweet!  You gotta let me at it w/ the sawsall!  I'm pretty good w/ one (just look at my truck)

hahaha.  going to hack the roof with a circular saw.  want nice pretty straight lines.

Like i said, my bed trimming is as near perfect as one can get, esp. since i was cutting on crumpled metal!
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work
Pages: [1] 2   Go Up
« previous next »