« previous next »
Pages: [1]   Go Down

Author Topic: Home made Gas tank Skid  (Read 1987 times)

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Home made Gas tank Skid
« on: September 23, 2013, 06:36:46 PM »
So after bashing in my tank and bending my pick-up, Twice! I made this up from stuff laying around!


It's 1/8" plate plug welded in the center and welded around the edges of the factory skid.



I heated and bent it on the back side for some extra strength.



The finished Product, I tested it at City Hall yesterday and so for so good!
Do you think it will survive Raush Creek???



Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline Mreecew

  • Rock Crawler
  • ****
  • Posts: 256
  • Bonzai Samurai!!!!
Re: Home made Gas tank Skid
« Reply #1 on: September 23, 2013, 06:49:36 PM »
Looks good. Glad it worked out yesterday.
Logged
1991 Samurai, 1.3 TBI, 35" KM2's, full 2 1/4" exhaust, SOA, RUF, Trail Tough Belly Skid, 5k Winch, Locked front and rear, GRS-2 transfer case gears (4.89:1 low), Built front axle with trusses, guards, gussets and birfield rings, Shrockworks gas tank skid, junk body and not much of a top.

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Home made Gas tank Skid
« Reply #2 on: September 24, 2013, 04:25:03 AM »
Nothing is MR Rock Proof and if it is then patten it cuz its worth a million
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Home made Gas tank Skid
« Reply #3 on: September 24, 2013, 05:49:31 AM »
Quote from: skibum on September 24, 2013, 04:25:03 AM
Nothing is MR Rock Proof and if it is then patten it cuz its worth a million

lol, I'm not that hard on my stuff!!!
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline Mreecew

  • Rock Crawler
  • ****
  • Posts: 256
  • Bonzai Samurai!!!!
Re: Home made Gas tank Skid
« Reply #4 on: September 24, 2013, 12:38:22 PM »
Quote from: Mr Rock on September 24, 2013, 05:49:31 AM
lol, I'm not that hard on my stuff!!!
ROCK, ROCK, wake up your dreaming buddy! lol
Logged
1991 Samurai, 1.3 TBI, 35" KM2's, full 2 1/4" exhaust, SOA, RUF, Trail Tough Belly Skid, 5k Winch, Locked front and rear, GRS-2 transfer case gears (4.89:1 low), Built front axle with trusses, guards, gussets and birfield rings, Shrockworks gas tank skid, junk body and not much of a top.
Pages: [1]   Go Up
« previous next »