« previous next »
Pages: [1]   Go Down

Author Topic: how hard would somthing like this be to make  (Read 2040 times)

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
how hard would somthing like this be to make
« on: August 06, 2009, 12:04:04 PM »
well i found these surfing the net and i want them but i am not paying those prices i like the removable flair idea cause i tend to rip off fender flairs  i think if i hacked up a stock yj fender and get rid of the arched portion they could be made pretty easily no tube bending all welding

http://www.metalcloak.com/YJ_Tube_Fender_p/2211.htm

http://www.metalcloak.com/PhotoDetails.asp?ShowDESC=N&ProductCode=2211

my ms paint rendition


i would hack off the fender at the blue line replace with tubing of sorts then the green lines would be the removable flair 

then do something similar for the rear
Logged
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

PaulW

  • Guest
Re: how hard would somthing like this be to make
« Reply #1 on: August 06, 2009, 02:08:46 PM »
Try it and let us know.
Logged

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: how hard would somthing like this be to make
« Reply #2 on: August 06, 2009, 03:52:47 PM »
Your best bet would be to mock something up and then go to a place like Logan Steel, by some tube and then have them put a bend in it for a few $$$.  It would be much cheaper then buying a bender, and much stronger/easier then a series of welds.  Check out Rogers new Jeep, he has some modified fenders that are re-enforced with steel tube.  The key with the flairs is to mount them with zip ties.  Strong enough to hold them on for street use, but when you hit a tree/rock they will rip off with little to no damage to the steel.  Carry a few zip ties and you can pop them back on before you hit the street again.

Also do a search for a company called Jeep Tubes in WA.  They make some tube fender kits that just require welding.  Not a bad price, but shipping would be expensive.  They might give you some ideas though. 
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: how hard would somthing like this be to make
« Reply #3 on: August 06, 2009, 08:30:11 PM »
if i decide to make these the flair portion will just be for street use so i want a little of fender showing on the trail so i would hack the fender off at the hood line and make a bolt on flat fender looking thing all of this is just an idea i had floating in my head and it works there i have not skeched it out on paper to scale to see if it works i am going to wait untill i get the new axles in first then this will be my next project they look awesome in my head i will see what they look like on paper first before i do any thing unless i find som free YJ fenders i can hack up
Logged
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: how hard would somthing like this be to make
« Reply #4 on: August 07, 2009, 02:52:02 AM »
when you say "flair" do you mean like in office space?  Because i would rather have fender flares; flair won't keep the cops happy
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: how hard would somthing like this be to make
« Reply #5 on: August 07, 2009, 05:49:18 AM »
way to go grammer NAZI's awesome
Logged
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: how hard would somthing like this be to make
« Reply #6 on: August 07, 2009, 11:43:35 AM »
grammer?  try spelling :)  i just think its funny when you read it!
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: how hard would somthing like this be to make
« Reply #7 on: August 07, 2009, 01:50:24 PM »
I thought it was funny too. It doesn't matter what board I'm on there is always something misspelled that makes the post humorous.
Logged
1994 YJ on 37s

PaulW

  • Guest
Re: how hard would somthing like this be to make
« Reply #8 on: August 07, 2009, 02:22:58 PM »
i like it when people put random words into their posts. naked shit farts.  it makes the thread fun.
Logged

VerAye

  • Guest
Re: how hard would somthing like this be to make
« Reply #9 on: November 20, 2009, 09:59:56 AM »
               Is a flair is a skill or instinctive ability to appreciate or make good use of something? This is a flair for a color, right?? I am not too sure to this thing that I said.

_________________
Tool & Die
Logged

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: how hard would somthing like this be to make
« Reply #10 on: November 20, 2009, 11:18:02 PM »
flair is more, the ability to accentuate an object and make it pop out and be instantly be recognized.

like highlighting something, your eyes instantly scan to it without you knowing it...

the second sentance gets read before the first.
Logged

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: how hard would somthing like this be to make
« Reply #11 on: November 20, 2009, 11:31:07 PM »
I'll show you some flair

Logged
Andy Doucette - A.K.A.(Douce)
W.O.J.

Offline HOT-ROD

  • Trail Master
  • *****
  • Posts: 2190
Re: how hard would somthing like this be to make
« Reply #12 on: November 21, 2009, 02:49:13 AM »
sweet movie. i like it.
Logged

Offline Tsunami

  • Rock Crawler
  • ****
  • Posts: 437
    • Tsunami's facebook
Re: how hard would somthing like this be to make
« Reply #13 on: November 21, 2009, 06:33:17 AM »
hey, just dont drop it when yur driving in front of me, i am not a fan of pikkin up yur scraps after a trail ride...lol
Logged
2010 mazdaspeed3

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: how hard would somthing like this be to make
« Reply #14 on: November 21, 2009, 11:50:57 AM »
what you mean pieces of trail light? lol
Logged
Andy Doucette - A.K.A.(Douce)
W.O.J.
Pages: [1]   Go Up
« previous next »