Just thought i would pop my head in and introduce myself. I have been a lurker on the board for a few months now.
My name is Tim, and Roger is a good friend of mine. He has been my wheeling wing man for the last three years now, until he moved.
He suggested I register and post up my project...
I have a well used 1993 Wrangler nicknamed the "Chicken Jeep"that has morphed into a hybrid over the last few months.
Here are the specs:
1993 Jeep Wrangler
Cammed 4.0 HO
AX-15 with center force stage I clutch
np231
Warrior products trail corners and rockers
sanden OBA conversion
cragar soft 8's 15x8 4" bs
33x12.5 ProComp X terrains
Pavement ends sunrider soft top
Koz Customs off road rear bumper
Hybrid begins:
"New" 1997 TJ Chassis
"New" 1997 d30/d35 4.10 open/open
3.5" BSD coils f & R
4" rough country lift shocks
Teraflex BPE F&R
3/4" custom t-case drop
2006 TJ front bumper w/end cap delete
Here are the build pics starting 3 years ago:
Day I found it:
After I put it back together:
Stage 1:1" body lift
Stage 2: 4" Rough Country Spring lift & 31s
Stage 3: 33x12.50s
Then I cracked the frame and the hybrid began:
Stage 4: Zero miles 1997 TJ rolling Chassis
I was being a good samaritan: