« previous next »
Pages: 1 [2]   Go Down

Author Topic: coolant/oil mixing again  (Read 3266 times)

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: coolant/oil mixing again
« Reply #15 on: August 19, 2008, 03:58:32 PM »
Good luck.

I can't imagine a new block from the dealer is going to be cheaper than one of those fully rebuilt ones from ebay, but you never know.
Logged
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline CnoteTJ

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 475
    • Facebook
Re: coolant/oil mixing again
« Reply #16 on: August 20, 2008, 05:50:26 PM »
4wd.com has http://www.4wd.com/productdetails.aspx?partID=40362

i dont know how much a dealership would charge for a new one though  ???
Logged
2011 Black Jeep Wrangler Rubicon
4" FT Long Arm w/ CRC link and 35" MTR/K's
Some armor and performance goodies!

www.northridge4x4.com    www.offroadevolution.com   www.full-traction.com

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: coolant/oil mixing again
« Reply #17 on: August 20, 2008, 07:07:24 PM »
So a new one from the dealership costs $851. 

I went to salvage yard and got one with 50% less miles on it for $150 last night and its now at L&L getting checked.

SO if anyone needs to do any head work I'm really good at tearing down and putting it back together.
Logged

Offline albsvx

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
Re: coolant/oil mixing again
« Reply #18 on: August 21, 2008, 03:27:51 AM »
cool, that sounds like a real reasonable price, and I'm sure L&L will take care of you with fixing up anything that's questionable about it.
Logged
1988 Jeep Wrangler Sahara - 4.0, TF-999, NP-231, Dana 30 Truetrac, Dana 44 Detroit Locker, 4.88s, on 35"s

Offline footman

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 637
Re: coolant/oil mixing again
« Reply #19 on: September 02, 2008, 09:17:38 PM »
So lil red is back up and running!  I got home sunday from vacation and spent last night putting her back together.  Everything was done and as I was tightening the tensioner pully the bolt snapped, I had a few choise words for the occasion.  At lunch today I ran to the salvage yard, removed the bolt from a wreck for $5 an ran home to install and whalah!  I do still have a squeal at cold start for 10-20 sec coming from the ac compressor, can I get in there and grease it up?
Logged

Offline rocket

  • Trail Master
  • *****
  • Posts: 2802
  • That is what i call, "Flexing"
    • my webshots photo site - lots of wheeling pics!
Re: coolant/oil mixing again
« Reply #20 on: September 02, 2008, 10:05:00 PM »
the compressor is lubricated by oil that is internal to the compresor.  your manual may tell you how to add some if needed.
Logged
1973 Chevy El Camino: 383 sb, lots of power
2004 Toyota Tacoma TRD 3.4L xtra cab 2.5" skyjacker coilovers/leafs, 32x11.5-15" Super Swamper TSL/SXs, Bent-up front bumper, smittybilt winch, 4xInovations sliders, Bud-built skids, custom rear bumper/light bar, hella lights, "custom" body work

Offline Gastank

  • Honorary Member
  • Mudd Hog
  • ***
  • Posts: 199
  • HORSEPOWER: A TIRE BURNING GOOD TIME!
Re: coolant/oil mixing again
« Reply #21 on: September 03, 2008, 09:14:41 AM »
Quote from: rocket on August 06, 2008, 08:08:36 PM
no idea.  do the 350 conversion.  350's can be had for a few hundred bucks.
Trust me... not as cheap as you think.
Logged
91 YJ, 350cid/TH400/231 4.5 RE springs, 2" Bonz shackles, 33/12.5/15 MT baja claws, and lock-rite in the rear.
"But it is better to fail in originality than to succeed in imitation." - Herman Melville

Offline Doball

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 353
Re: coolant/oil mixing again
« Reply #22 on: September 03, 2008, 01:22:49 PM »
Where is this salvage yard you keep going to? Do they have any good stuff left?
Logged
Pages: 1 [2]   Go Up
« previous next »