« previous next »
Pages: [1]   Go Down

Author Topic: Replacing rear pinion seal...  (Read 1778 times)

Offline submrnman

  • Trail Queen
  • **
  • Posts: 52
Replacing rear pinion seal...
« on: October 22, 2011, 06:24:24 PM »
The rear pinion seal in me rear diff has just developed a slow leak... The new pinion seal and diff gasket just came in the mail the other day.n I have never done a pinion seal replacement, I know the basics of it though.  Has anyone ever replaced a pinion seal?  If so, any guidance you can offer would be much appreciated....
Logged

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: Replacing rear pinion seal...
« Reply #1 on: October 22, 2011, 08:49:30 PM »
I'm not an expert by any means, but it would be helpful to know what real axle you are running.
Logged
Andy Doucette - A.K.A.(Douce)
W.O.J.

Offline submrnman

  • Trail Queen
  • **
  • Posts: 52
Re: Replacing rear pinion seal...
« Reply #2 on: October 22, 2011, 09:05:40 PM »
Oh sorry.  I'm running a Dana 35 in the rear.
Logged

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Replacing rear pinion seal...
« Reply #3 on: October 23, 2011, 01:32:25 AM »
Changing a pinion seal is very easy. There is just one very important thing to know first before anything is disasembled. It is very important to put a referance mark on the pinion nut & shaft so when retighening the marks they are lined up to make sure the crush collar is not over tighened & not change the pinoin bearing preload. Hope this helps you out.
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Bill3753

  • Honorary Member
  • Rock Crawler
  • ***
  • Posts: 476
Re: Replacing rear pinion seal...
« Reply #4 on: October 23, 2011, 03:03:16 AM »
Another this you want to do is make sure you replace the nut with a new one.  They use a thread deforming lock nut on the pinion.  Basically, they are only good to be torqued once.  You can use them again, but you'll risk it backing off.  That will change your bearing preload and cause big problems in the rear.
Logged
04 TJ, HP60, 14 Bolt, 5.13's, linked, locked, on 38's and (still) in the works.

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Replacing rear pinion seal...
« Reply #5 on: October 23, 2011, 04:23:29 AM »
Like skibhm says, mark it ! Then I count the turns it takes to unscrew the nut so I know how far to put it back on.

Bill is right you should install a new nut, but I have had good luck reusing the nut.
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Replacing rear pinion seal...
« Reply #6 on: October 23, 2011, 07:27:28 PM »
I have replaced hundreds of pinion seals & have never seen one back off yet. You can use Lock Tite if you want the extra security.
« Last Edit: October 23, 2011, 07:29:30 PM by skibum »
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline gearhead1985B

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 882
  • the Snozberries taste like Snozberries
Re: Replacing rear pinion seal...
« Reply #7 on: October 24, 2011, 12:44:58 AM »
Quote from: skibum on October 23, 2011, 07:27:28 PM
I have replaced hundreds of pinion seals & have never seen one back off yet. You can use Lock Tite if you want the extra security.

x2
Logged
"If you can read this, Thank a Teacher, if you can read it in English, thank a SOLDIER"

https://www.masterpull.com/Index.aspx
http://www.taboocustoms.com/

Offline submrnman

  • Trail Queen
  • **
  • Posts: 52
Re: Replacing rear pinion seal...
« Reply #8 on: November 01, 2011, 04:51:27 PM »
Cool thanks.  I am doing the pinion seal this weekend.  What gear oil do you guys recommend?  I usually run 75W-90.  Just wondering if I could be running something better...
Logged

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Replacing rear pinion seal...
« Reply #9 on: November 01, 2011, 10:32:12 PM »
Synthetic 75W90 is fine unless your towing then you should use synthetic 75W140
Logged
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline submrnman

  • Trail Queen
  • **
  • Posts: 52
Re: Replacing rear pinion seal...
« Reply #10 on: November 02, 2011, 01:59:28 PM »
Thanks man.  It was good to meet you guys last night.  I'mm looking forward to the Nov Trail Ride.  I just have a few last minute tweaks to do to the Heep so it's ready...
Logged
Pages: [1]   Go Up
« previous next »