« previous next »
Pages: [1]   Go Down

Author Topic: New Parts Arrived  (Read 1271 times)

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
New Parts Arrived
« on: November 24, 2010, 07:45:41 PM »
I just got back and I was excited to see all the parts I ordered arrived. ;D
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: New Parts Arrived
« Reply #1 on: November 25, 2010, 12:58:10 AM »
Pics!
Logged
Andy Doucette - A.K.A.(Douce)
W.O.J.

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: New Parts Arrived
« Reply #2 on: November 28, 2010, 04:36:12 AM »
So after I tore down the front axle, I found that 4 wheel parts wholsales sent me the wrong front axle shafts.  They sent me 30 spline instead of the 27 spline.  I already installed the Aussie so I will just have to a little lighter on the skinny pedal then I would like.  I have done a lot of research and with the HP D30, 4.10 gears, 35's, and TJ shafts "should" be ok.  I upgraded the U-joints to Alloy USA 760 joints which are 30% stronger then stock.  I carry spare shafts so hopefully I will be ok for a few more weeks  ;).

The Aussie went is very easy, much easier then the 8.8.  It is much easier to install when the carrier is on the bench.  The new U-bolt skids go on in the morning.
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: New Parts Arrived
« Reply #3 on: November 28, 2010, 05:27:59 PM »
Quote from: kirksjeep on November 28, 2010, 04:36:12 AM
The Aussie went is very easy, much easier then the 8.8.  It is much easier to install when the carrier is on the bench.  The new U-bolt skids go on in the morning.

Kirk, 
I just installed a lockrite in my 8.8 and it seems to bind up when i switch from forward to reverse or vise versa. the lock right and the Aussie are just about identical. I'm wondering if you had and problems when you installed the Aussie in your 8.8.
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: New Parts Arrived
« Reply #4 on: November 28, 2010, 11:36:16 PM »
Quote from: Mr Rock on November 28, 2010, 05:27:59 PM
Quote from: kirksjeep on November 28, 2010, 04:36:12 AM
The Aussie went is very easy, much easier then the 8.8.  It is much easier to install when the carrier is on the bench.  The new U-bolt skids go on in the morning.

Kirk, 
I just installed a lockrite in my 8.8 and it seems to bind up when i switch from forward to reverse or vise versa. the lock right and the Aussie are just about identical. I'm wondering if you had and problems when you installed the Aussie in your 8.8.

Rock- the 8.8 didn't want to disengage for the first hundred miles or so.  I would try to coast through turns and it would lock and unlock.  I has since broke in and don't even notice it on the street any more.
Logged
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: New Parts Arrived
« Reply #5 on: November 30, 2010, 01:45:32 AM »
Quote from: kirksjeep on November 28, 2010, 11:36:16 PM
Rock- the 8.8 didn't want to disengage for the first hundred miles or so.  I would try to coast through turns and it would lock and unlock.  I has since broke in and don't even notice it on the street any more.

That's what mine is doing, I'll keep running it and hopefully it will also break in, not just Break.

 Thanks,
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!
Pages: [1]   Go Up
« previous next »