JT4x4

The Mud Pit => Wrenching => Topic started by: Rebell Bull on March 07, 2008, 09:33:30 AM

Title: Pitman Arm
Post by: Rebell Bull on March 07, 2008, 09:33:30 AM

Hey guys, remember those stupid old pitman arms, well I got mine off tonight really easy. I cut a chunck out of the old one and  then put the pitmanarm puller on it that I have at the shop. Then, used  the ball joint seperator for the other side, then put the new one on. Steers like a new car, not. Actually, there is more play now.

(http://i152.photobucket.com/albums/s191/jt4X4/Alex/Alex%20pics/cutpitman.jpg)

Title: Re: Pitman Arm
Post by: rocket on March 07, 2008, 11:37:30 AM

that sucks!  at least you have a new billy club!

Title: Re: Pitman Arm
Post by: HOT-ROD on March 08, 2008, 03:02:34 PM

yeah.

so how is your alignment?

Title: Re: Pitman Arm
Post by: Rebell Bull on March 09, 2008, 03:05:59 AM

allignment still off, need to get it done

Title: Re: Pitman Arm
Post by: Doball on March 09, 2008, 03:35:36 AM

Oz found a good guide to do it, I'll ask him tomorrow how he did it.

Title: Re: Pitman Arm
Post by: HOT-ROD on March 09, 2008, 05:04:27 AM

yeah, i thought it was posted on the old original forum?

Title: Re: Pitman Arm
Post by: Axle on March 09, 2008, 03:47:34 PM

www.4x4xplor.com (http://www.4x4xplor.com)


Try this one.  Click under the write up's section, and then go to the yj threads.  There should be an alignment thread in there.