JT4x4

The Mud Pit => General => Topic started by: Blackzj4x4 on April 08, 2014, 04:49:03 AM

Title: New guy jj miller
Post by: Blackzj4x4 on April 08, 2014, 04:49:03 AM

Hey guys thanks for the add two the forum. I have a 98 grand cherokee with the 5.2 L v-8 lifted 3.5 inches sitting on 31's. I'm currently enlisted in the marine corps and look forward to meeting you all when a meet comes up. I need some help with some drive line vibration and other little stuff but again thanks for the add

Title: Re: New guy jj miller
Post by: skibum on April 08, 2014, 12:42:48 PM

Welcom to the forum JJ. I owned a 98 ZJ Limmited 5.2L. Miss that jeep. Your drive line vibration is most likely caused by the NP 249 T case. I have herd lifts over 2.5in cause vibrations. If you can adjust your front pinoin angle up some it will help but also look for a NP 231. Not sure on the input spline count so you will need to do some resurch on that. Good luck

Title: Re: New guy jj miller
Post by: Mr Rock on April 08, 2014, 02:21:46 PM

Weloome aboard!

Title: Re: New guy jj miller
Post by: calvynandhobbs on April 08, 2014, 05:55:53 PM

Welcome aboard JJ

Title: Re: New guy jj miller
Post by: Mayhem on April 08, 2014, 06:18:38 PM

Welcome to the forum, JJ 8)