JT4x4
The Mud Pit => Wrenching => Topic started by: CaptORM on March 08, 2008, 04:52:12 AM
-
Anybody have any ideas...????
This happened on the road today. I assume that things werent exactly right before hand but this happened today.
The death wiggle is horrible now...
(http://i152.photobucket.com/albums/s191/jt4X4/Rich%20H/Rich%20H%20Pics/100_0894.jpg)
(http://i152.photobucket.com/albums/s191/jt4X4/Rich%20H/Rich%20H%20Pics/100_0900.jpg)
-
Buy Alex some beer and wire, and go find one in a junkyard, or make one.
Maybe try welding something like this in it's place,
http://cgi.ebay.com/ebaymotors/Rough-Country-track-bar-bracket-Jeep-Grand-Cherokee-ZJ_W0QQcmdZViewItemQQcategoryZ33585QQihZ014QQitemZ330217187625QQrdZ1QQsspagenameZWDVW (http://cgi.ebay.com/ebaymotors/Rough-Country-track-bar-bracket-Jeep-Grand-Cherokee-ZJ_W0QQcmdZViewItemQQcategoryZ33585QQihZ014QQitemZ330217187625QQrdZ1QQsspagenameZWDVW)
stiffen it up and you're good to go.
Really couldn't find much of anything after searching for about 15 min. I get the feeling this will be a DIY Certified Redneck Engineering project.
-
DUH!
http://www.quadratec.com/products/RE1665.htm (http://www.quadratec.com/products/RE1665.htm)
http://cgi.ebay.com/ebaymotors/Rubicon-Express-RE1665-Bracket-H-D-Track-Bar-XJ-ZJ_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ42609QQihZ012QQitemZ220191429017QQrdZ1QQsspagenameZWD1V (http://cgi.ebay.com/ebaymotors/Rubicon-Express-RE1665-Bracket-H-D-Track-Bar-XJ-ZJ_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ42609QQihZ012QQitemZ220191429017QQrdZ1QQsspagenameZWD1V)
-
Duct tape and JB weld aught to do it!
-
i think that was when we went hog wild BTC, and you were stuck on top of that rock. beause you kept sliding off that rock and landing on your shock mount's and steering components.
-
I have some extra 1/4" flat stock lying around, we might be able to do something Got to see it in person but yeah I do feel the redneck coming out in me. See you monday evening.
-
Sounds good rebel. I think we can figure something out with some flat stock. Or repair and re-enforce what I have there now. Its worse in person trust me. Unfortunatly the pictures are not doing the damage justice.
-
wheel, break, fix, repeat...
-
if ya need help with the fab let me know, i got the connections at the machine shop
-
sweet. that is def a hook up
-
Well me and Rebel fixed my rig last night.
There was way more damage then initially seen.
The lower control arm brackets where hanging on for dear life. The out brace was completely broken off and the inner brace was starting to break loose. We rewelded that together and placed a bracket across the control arm brackets.
Then came the track bar...The aftermarket drop down was destroyed and the stock bracket was torn and bent. We grunted it back in place and welded then welded on some support brackets to keep it from happening again.
So the rig is fixed now. Thanks again for your help rebel. Couldnt have done it without you. And thanks for adding in the work time at the shop.
-
What about your u-joint? Were you able to replace it?
-
nope u-joint is still broken
-
should'a done it same time. dunno?
but you should get greasable joints when you fixt them.