JT4x4

The Mud Pit => Wrenching => Topic started by: CnoteTJ on August 30, 2011, 09:44:47 PM

Title: 4" Full Traction Long Arm with CRC Link
Post by: CnoteTJ on August 30, 2011, 09:44:47 PM

Just got done with the lift yesterday after a long week at the hobby shop!  Thanks to Chris at Full Traction for all the help!

(http://i14.photobucket.com/albums/a345/zcnote/DSC02792.jpg)

(http://i14.photobucket.com/albums/a345/zcnote/DSC02794.jpg)

(http://i14.photobucket.com/albums/a345/zcnote/DSC02797.jpg)

(http://i14.photobucket.com/albums/a345/zcnote/DSC02779.jpg)

(http://i14.photobucket.com/albums/a345/zcnote/DSC02776.jpg)
 
I cant wait to take her out and flex her legs!

Title: Re: 4" Full Traction Long Arm with CRC Link
Post by: skibum on September 01, 2011, 03:56:17 PM

Very nice. How was it to align? Just courious cuz the alignment rack at my work does not give any specks for the rear but it's not needed due to nothing is adjustable from the factory. Now after installing a kit like that then everything is adjustable. There might be a way to set up our alignment machine to do this just don't now how to. It's a Hunter DSP600. Gess I will have to call Hunter teck support when I get a lift for my JK. Again nice lift kit.

Title: Re: 4" Full Traction Long Arm with CRC Link
Post by: CnoteTJ on September 10, 2011, 04:08:10 PM

Thanks!  As far as alignment goes my side to side on the rear axle is off by about .5" so i need to adjust the CRC links (kinda difficult to figure out at first) and I had a little problem with adjusting one of the upper rear arms so I had to push the lowers out another inch to compensate but Full Traction sent me a new one while I was in Florida so I can change it out when I get a chance.  8)

Title: Re: 4" Full Traction Long Arm with CRC Link
Post by: GreenGrandV8 on October 11, 2011, 05:16:11 AM

that lift is pretty sick. im over here drulin over that rear setup. crazy. looks sweet