JT4x4
The Mud Pit => Wrenching => Topic started by: Magnum Opus on September 23, 2015, 02:35:04 PM
-
I am looking around for skid plates.....specifically the sets. The River Raider set seems to be the prominant kit. Does anybody have any experience with these kits, or have any other recomendations? I think the best deal I found was just over a grand. My initial thoughts are that buying a kit , the pieces will work together better. This one takes care of Engine, Tranny, X-fer case, and G-tank. Sliders for the pumpkins will still be needed and the kit will allow the expansion to a long arm kit. Please provide input. Looking on sealing the deal this winter.
-
Skip the sliders for the differentials. A set of Heavy Duty diff covers are really all you need. Anything that is going to damage a diff housing will destroy one of those differential skid plates, save your money for something else.
-
I have the kit from Off Road Evolution and have been happy with them. I also have the Poison Spyder evap Skid. And even with good diff covers, I would not be comfortable dragging my rear diff over rocks the way I do without my AEV diff slider. Love that thing. It protects the drive shaft where it bolts to the diff very well.
I think JKSue runs the River Raider skids on her 2dr.
-
Thanks John and Toreador!
I just read up on the ORE Protek kit. Gotta do a touch more research but the bang for the buck part of the ORE kit is winning me over. The biggest complaint I have seen thus far is that the RORR kit transfers all the weight to the frame, whereas the ORE kit on an oil pan landing sends it to the engine (then of course the mounts), then the frame. I think the mounts can take it. That will definately leave a bit more green to go to the next part of the build!
The RORR definately looks sexy though......but they said the same thing about the Dodge Stealth!
The only think I can see in favor of the RORR now is the overall sliperyness of the underbelly when done. Even though both protect well, I gotta find out if the RORR trails better when challenged and if the extra 600 bones is worth it for a smoother belly.
Also adding dif covers to the wish list, specifically for the front and probably a rear dif slidder.....I intend on moving forward more than reverse......awe hell I'm a clumsy driver!.....I'm gonna ask Santa Clause for a rear dif cover too! I don't want to be a clutch stab from falling into a rock backward!
-
Look into the Clayton skids.
-
Idk much about aftermarket wrangled stuff but best I've seen is probably the undercover fab stuff. Might be worth it to check them out
-
Friend of mine from work, pointed me to these skids today.
Good budget friendly setup.
http://www.offroadevolution.com/store/proddetail.php?prod=EVO-PROTEK
-
The ORE Evo Protek was exactly what I was looking at and comparing to RORR. I think those might be the ones. I will probably kick myself later, but I don't think underbelly smoothness to help slide off of rocks when comparing the two is worth the extra 600. Plus I don't see corporate sponsership heading my way.....I think I have time for winching. Now to decide who has the most effective diff covers. Looks like the most price dense piece I am looking for is gonna be the AEV aft pumpkin slider.....Holy crap they are proud of those things!
I think I am gonna have to move fast....the wife is getting smart to the money dump on the Jeep! Got my quick disco's in this week, and regearing this weekend! Probably not going to be able to make City Hall, but my clutch probably would not have survived if I went pre-regear!
-
Skibum....I looked at the Claytons and I know they come with much acclaim, but just like the RORR they are missing the bang for the buck for a daily driver/monthly crawler. (Watch me eat those words in the next 3 years) I don't doubt their quality, and I would like to have them, but I would also like a Cummins Turbo Diesel in the rig too, not sure if the Rig is ready.
Taking into consideration that you get what you pay for....I also need to mix in paying for what I need.
-
RuffStuff Specialties covers are really nice. I had one on my last D60/D70 combo. 3/8" steel both the flange and cover, never going to hurt them.
More bang for your buck would be the Solid diff covers they are about $65 each, but are cast so they aren't as strong as the plate style covers.
-
The ORE Evo Protek was exactly what I was looking at and comparing to RORR. I think those might be the ones. I will probably kick myself later, but I don't think underbelly smoothness to help slide off of rocks when comparing the two is worth the extra 600. Plus I don't see corporate sponsership heading my way.....I think I have time for winching. Now to decide who has the most effective diff covers. Looks like the most price dense piece I am looking for is gonna be the AEV aft pumpkin slider.....Holy crap they are proud of those things!
I think I am gonna have to move fast....the wife is getting smart to the money dump on the Jeep! Got my quick disco's in this week, and regearing this weekend! Probably not going to be able to make City Hall, but my clutch probably would not have survived if I went pre-regear!
I still recommend skipping the diff slider, its a lot of money to spend on something that is going to reduce ground clearance and with the JK running round flanges protecting the driveshaft isn't as big of a deal compared to yoke style driveshafts. The round flanges don't really get hung up like a U joint yoke does. $250 goes a long way towards another mod.
-
Point taken. I did not think about the reduced liabilities of round flanges....Thank You! That actually takes the costs down to well below what my initial thoughts were. And it frees up cash for the next thing......a functional analysis of Sir Rusty Von Pokey a.k.a "Sparky" (the elderly Superwinch on the front of the Rig). That is the next thing I think I need to make bomb proof after the mods discussed in this thread are complete!
-
More bang for your buck would be the Solid diff covers they are about $65 each, but are cast so they aren't as strong as the plate style covers.
What he said^, I have the Solid covers they are plenty tough enough. get lube locker gaskets no matter which cover you get!
A larger flat skid is worth it vs the narrow one. a flat one will slide over more obstacles. I understand wanting to be budget minded but, Skids are not the area to skimp on, protection is worth its weight, just my two cents!
-
More bang for your buck would be the Solid diff covers they are about $65 each, but are cast so they aren't as strong as the plate style covers.
What he said^, I have the Solid covers they are plenty tough enough. get lube locker gaskets no matter which cover you get!
A larger flat skid is worth it vs the narrow one. a flat one will slide over more obstacles. I understand wanting to be budget minded but, Skids are not the area to skimp on, protection is worth its weight, just my two cents!
x2 on the Solid Diff Covers and the flat skid. If you can gain clearance in the middle of the Jeep its like adding more lift since this is the area that gets hung up on rocks. The center skid is also the transmission/transfer case cross member, it is very important to get one that will not bend and knock the drive line out of wack. I am more familiar with the YJ's and TJ's, but when adding a belly up skid it may require other mods like a 1" body lift and a 1" MM lift to get everything tucked up right. Keep this in mind when pricing things out. My Jeep has a Kilby Enterprises belly up and it has taken a beating.
-
I've never owned a JK and don't know much about the products for them, but I do agree with what Kirk just stated.
-
I don't know how I missed this - have you bought anything yet? I do have the full River Raider set - you can check em out if you're still looking. My only complaint would be that some of the bolts aren't recessed. Some are, some aren't & I wish they all were because Bob & Rock are gonna have a hard time getting them off yet again. ;) But they have great coverage & have held up perfectly, no complaints there.
I also have the Solid diff covers, a great buy. Spend the savings on a good set of skids.
The first time they went on, all shiny & new:
(http://i181.photobucket.com/albums/x243/srogowski/jeep/3cffbb2f-1.jpg) (http://s181.photobucket.com/user/srogowski/media/jeep/3cffbb2f-1.jpg.html)
-
Thanks JKSue! I ordered the eng/trans Rock Hard plate! It is sitting in my dinning room right now waiting for install. That River Raider set looks awesome! I'll be ordering Solid covers in the next few days. Currently stalled out on the build though due to a potential RV total (friggin Tree fell on it) might loose alot of weekend time finding a replacement!