JT4x4

The Mud Pit => Wrenching => Topic started by: Seabee_BUC on January 08, 2009, 07:39:22 PM

Title: It Works!!!!!!!!
Post by: Seabee_BUC on January 08, 2009, 07:39:22 PM: As you can see, my birthday present does quite nicely...

(http://inlinethumb23.webshots.com/32342/2768588090104183186S425x425Q85.jpg) (http://good-times.webshots.com/photo/2768588090104183186tnoaiK)

Now to take the rails off the FJ and add these...
Title: Re: It Works!!!!!!!!
Post by: One-Eye on January 08, 2009, 08:04:33 PM: So I have this friend and he has a Jeep. I .. I mean he wants to know if you could like bend and maybe weld a full exo cage that ties into the frame and maybe while your at it make the current roll cage a full cage. ;D Just kidding man. Congrats on the b-day gift and glad it works. I need to set my sights low. Come on Garage!!! Then maybe we'll talk about benders and welders and stuff.
Title: Re: It Works!!!!!!!!
Post by: Axle on January 08, 2009, 08:15:27 PM: Very nice, Scott. I can't wait to see the finished product.
Title: Re: It Works!!!!!!!!
Post by: rocket on January 08, 2009, 08:21:41 PM: ditto! looks like you will have some sweet sliders!
Title: Re: It Works!!!!!!!!
Post by: Seabee_BUC on January 08, 2009, 08:25:43 PM: Quote from: One-Eye on January 08, 2009, 08:04:33 PM
So I have this friend and he has a Jeep. I .. I mean he wants to know if you could like bend and maybe weld a full exo cage that ties into the frame and maybe while your at it make the current roll cage a full cage. ;D Just kidding man. Congrats on the b-day gift and glad it works. I need to set my sights low. Come on Garage!!! Then maybe we'll talk about benders and welders and stuff.

I think I know that guy...His Jeep has been sitting out in the freezing ass cold for months now....I think it needs a jumpstart first! LOL.... ;)
Title: Re: It Works!!!!!!!!
Post by: PaulW on January 09, 2009, 02:21:47 AM: Quote from: One-Eye on January 08, 2009, 08:04:33 PM
So I have this friend and he has a Jeep. I .. I mean he wants to know if you could like bend and maybe weld a full exo cage that ties into the frame and maybe while your at it make the current roll cage a full cage. ;D Just kidding man. Congrats on the b-day gift and glad it works. I need to set my sights low. Come on Garage!!! Then maybe we'll talk about benders and welders and stuff.

haha i still have my sights set lower and am hoping to get a jeep that runs :D
Title: Re: It Works!!!!!!!!
Post by: One-Eye on January 10, 2009, 02:34:33 AM: Quote from: Seabee_BUC on January 08, 2009, 08:25:43 PM
Quote from: One-Eye on January 08, 2009, 08:04:33 PM
So I have this friend and he has a Jeep. I .. I mean he wants to know if you could like bend and maybe weld a full exo cage that ties into the frame and maybe while your at it make the current roll cage a full cage. ;D Just kidding man. Congrats on the b-day gift and glad it works. I need to set my sights low. Come on Garage!!! Then maybe we'll talk about benders and welders and stuff.

I think I know that guy...His Jeep has been sitting out in the freezing ass cold for months now....I think it needs a jumpstart first! LOL.... ;)

I am actually waiting untill I have a couple more bucks saved up so that I can have him install the front locker at the same time. I have a "G" sitting in hot stand-by just a couple more hundered to make sure.

*Updated* Oh yeah...SSSSSHHHHHHH Don't tell Michelle ;) ;) ;)
Title: Re: It Works!!!!!!!!
Post by: Seabee_BUC on January 10, 2009, 06:40:27 AM: Sweet!
Title: Re: It Works!!!!!!!!
Post by: rocket on January 10, 2009, 06:55:20 AM: When can I borrow your bender to make a light bar? :D:D:D
Title: Re: It Works!!!!!!!!
Post by: PaulW on January 10, 2009, 05:46:36 PM: word
Title: Re: It Works!!!!!!!!
Post by: rocket on January 10, 2009, 05:48:39 PM: Quote from: PaulW on January 10, 2009, 05:46:36 PM
word

trying to pad the numbes? LOL
Title: Re: It Works!!!!!!!!
Post by: HOT-ROD on January 10, 2009, 06:43:32 PM: Quote from: rocket on January 10, 2009, 05:48:39 PM
Quote from: PaulW on January 10, 2009, 05:46:36 PM
word

trying to pad the numbes? LOL

does those two lines make sence to anyone else?

i dont get it
Title: Re: It Works!!!!!!!!
Post by: PaulW on January 11, 2009, 07:15:39 PM: Quote from: HOT-ROD on January 10, 2009, 06:43:32 PM
Quote from: rocket on January 10, 2009, 05:48:39 PM
Quote from: PaulW on January 10, 2009, 05:46:36 PM
word

trying to pad the numbes? LOL

does those two lines make sence to anyone else?

i dont get it

(http://l.yimg.com/g/images/spaceball.gif)
Title: Re: It Works!!!!!!!!
Post by: Seabee_BUC on April 12, 2009, 11:28:31 PM: So it may have took me 6 months but they're finally done...

(http://inlinethumb40.webshots.com/42727/2951195400104183186S500x500Q85.jpg) (http://good-times.webshots.com/photo/2951195400104183186NunvRC)

(http://inlinethumb16.webshots.com/41615/2927435990104183186S500x500Q85.jpg) (http://good-times.webshots.com/photo/2927435990104183186IhYvzZ)

(http://inlinethumb59.webshots.com/44794/2084736130104183186S500x500Q85.jpg) (http://good-times.webshots.com/photo/2084736130104183186cXwGcX)
Title: Re: It Works!!!!!!!!
Post by: kirksjeep on April 13, 2009, 01:45:40 AM: Nice work Scott!!! :)
Title: Re: It Works!!!!!!!!
Post by: BayouGold on April 13, 2009, 02:25:32 AM: somebody's got a nice carreer after the navy!
Title: Re: It Works!!!!!!!!
Post by: Swagger on April 13, 2009, 03:56:04 AM: purty
Title: Re: It Works!!!!!!!!
Post by: Axle on April 13, 2009, 04:32:30 AM: WOW!!!! Those look fantastic, Scott! Where did you buy them from? ;D
Title: Re: It Works!!!!!!!!
Post by: Seabee_BUC on April 13, 2009, 01:57:56 PM: Quote from: BayouGold on April 13, 2009, 02:25:32 AM
somebody's got a nice carreer after the navy!

Did I mention the house we're moving into in MS has a 20x20 shop out back?? I don't think I'll be waiting until I retire to start making some money off of doing this...LOL
Title: Re: It Works!!!!!!!!
Post by: PaulW on April 13, 2009, 05:49:43 PM: Quote from: Seabee_BUC on April 13, 2009, 01:57:56 PM
Quote from: BayouGold on April 13, 2009, 02:25:32 AM
somebody's got a nice carreer after the navy!

Did I mention the house we're moving into in MS has a 20x20 shop out back?? I don't think I'll be waiting until I retire to start making some money off of doing this...LOL

nice. hey ship me a set when your ready.