JT4x4
The Mud Pit => Wrenching => Topic started by: footman on October 02, 2009, 01:17:17 AM
-
Hey guys just wondering if you could throw out some ideas. So after installing my new driveshaft I have a slight vibration. I rechecked pinion and driveshaft angles, both are 19 degrees. What else could it be?
-
is the drive shaft banlanced?
-
its balanced
-
i would suggest a wheel bearing then maybe. I have the same issue with my front drive shaft. Thats why i took it off, then it stoped. I got it balanced and pick it up tomorrow. I have no idea... anyone else?
-
is every thing tight can you isolate it is coming from the front or the back since your tj's front drive shaft spins all the time remove it and see if the vibes go away if they do balance your front drive shaft Because that was not replaced when you did your lift also when did you have your tires balanced
-
I think I got rid of my deathwobble today. I tightened the pitman arm on the steering box and got the tires balanced and it seems as though vibrations are gone and deathwobble is gone from 35-40mph. If you haven't had your tires balanced in a while it's something to think about, especially if you have slices and chunks taken out of your tread from the rocks.
-
What speed does it vibrate? does it get worse up to 65 then smooth out at 75plus? if so its tire balance. if not you have an issue with another rotating mass.