The Mud Pit > Wrenching

Dead gauges & radio

<< < (2/3) > >>

Doball:
Done, ALL fuses are good. Looking at the Hanes wiring diagram, there might be a fuse in the cluster itself. Other than that I'll have to find one somewhere else. The only problem with that is I don't know where the odometer reading comes from. The computer or the circuit board on the gauge cluster.

rocket:
is it digital display (the OD) or analog?  if digital, it probably has a memory feature either in the board or computer (probably board) and is driven by the VSS via the ECU, if anolog, probably driven off a motor which gets its signal from the VSS throug the ECU

Doball:
Alright, I found it. A burnt wire coming from the power box under the hood. When you use a meter to test a fuse, test the voltage coming off of both sides of the fuse at the same time.

rocket:
congrats!

Axle:
Yeah...  Uh..  All I got out of this whole thread was:

Have a wiring problem?

Call Doball or Rocket.   ;D

Navigation

[0] Message Index

[#] Next page

[*] Previous page