The Mud Pit > Wrenching
Rubi's Build up
Axle:
Yup, hobby shop.
Axle:
Ok, so today...
Mounted the track bar bracket
Dropped the rear axle and began weld prep work. Got the right side off and ground smooth and the left is in progress.
Installed the front brake lines at the frame.
New pitman arm went on Saturday, so the steering is set up except for an alignment.
Skid plate is installed, but needs one more bolt installed on the right side. Just need to tap it and find another bolt.
Should finish the front end tomorrow, except for the the shocks. Hopefully we'll get the axle over to Karns for the welding also.
More work tomorrow. I'm planning on being there around 11 or 12 for a few hours. Gary is trying to get special lib, or at least get off at a decent time. I figure he'll owe the shop around $200 or $250 at this pace. Any help would be appreciated.
rocket:
sorry i didn't show; i just now checked the forum. sorry guys :(
Axle:
Gary took the axle up to Pete to get the bracket welded on tonight. Tomorrow he's going to cut off the lower control arm brackets at the frame, as that is really holding us up. Once he gets that done, it should be smooth sailing until we're finished. I'd say we'll be there around 1300ish, but I would call one of us first if anyone plans on helping. Still just been me, gary, and zach. All week... ::)
ct axle:
Axle , thank you for sending the boys up to see me. i know they were not disappointed in my ability. pete
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version