The Mud Pit > Wrenching

Broken shock mount..help

<< < (2/3) > >>

nvrdun:

--- Quote from: Axle on May 13, 2008, 03:46:56 AM ---Good lord!  What are your hours?

--- End quote ---
Mondays i work all day........ :'( 8am till closing time 11pm. >:(

Axle:
Where do you work?  A restaraunt?

nvrdun:

--- Quote from: Axle on May 13, 2008, 03:48:58 AM ---Where do you work?  A restaraunt?

--- End quote ---
i work at the Msun.. yup!!

Seabee_BUC:

--- Quote from: nvrdun on May 12, 2008, 07:51:52 PM ---guys, i snap a bolt  >:( from my rear drivers side(shock mount bottom).... i bought the mount but can't not get the old one out... 
any ideas other than taking it to the shop.. thanks

--- End quote ---

You say you bought a new mount, meaning the bolt snapped and the shock can't be removed so you are thinking about cutting your shock mount off and putting a new one on? Before doing that I'd do what Axle suggested, try to use an easy out to get the bolt out. Soak it with PB Blaster or WD40 for a few days before attempting to remove it. It might be simply be a good whack with another bolt to break the frozen one free without having to drill it out. If all else fails, you could remove the shock mount bracket but that should be your last resort. Keep us posted!

HOT-ROD:
it seems one of the two choices is inevitable with the shock mount

Navigation

[0] Message Index

[#] Next page

[*] Previous page