The Mud Pit > Wrenching

Check this out...My rig is broken

<< < (3/3)

CaptORM:
Well me and Rebel fixed my rig last night.

There was way more damage then initially seen.

The lower control arm brackets where hanging on for dear life.  The out brace was completely broken off and the inner brace was starting to break loose.  We rewelded that together and placed a bracket across the control arm brackets. 

Then came the track bar...The aftermarket drop down was destroyed and the stock bracket was torn and bent.  We grunted it back in place and welded then welded on some support brackets to keep it from happening again.

So the rig is fixed now.  Thanks again for your help rebel.  Couldnt have done it without you.  And thanks for adding in the work time at the shop. 

Axle:
What about your u-joint?  Were you able to replace it?

CaptORM:
nope u-joint is still broken

HOT-ROD:
should'a done it same time. dunno?

but you should get greasable joints when you fixt them.

Navigation

[0] Message Index

[*] Previous page