Author Topic: Wj project  (Read 6988 times)

Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Wj project
« on: November 07, 2016, 11:35:30 PM »
So today i started my newest of projects, my 02 wj v8 project jeep. I ordered my lift last week, rough country 4 inch, I'll have  (for now) a used set of 33s with 1.5 spacers.

Tonight I started the front end in leiu of the lift coming in tomorrow morning. It took less than 2 hours to removed everything, shocks, lower control arms, sway bar links and trac bar.

This is just after I got everything except the control arms off


Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Wj project
« Reply #1 on: November 09, 2016, 01:14:00 AM »
Looking good. Can't wait to see the finished project on the trail
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Re: Re: Wj project
« Reply #2 on: November 09, 2016, 01:18:10 AM »
Looking good. Can't wait to see the finished project on the trail
Took less than 2 hours to get the front installed, need the shocks installed and the sway bars and one little bolt
Tomorrow.im.hoping to tear down the rear and set it up for install


Sent from my SAMSUNG-SM-G935A using Tapatalk


Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Re: Wj project
« Reply #3 on: November 12, 2016, 07:14:28 PM »
Just awaiting my spacers for my crappy tires, and then I have to install the new pitman arm and rear shocks (lower bolts are seized) and get it aligned



Sent from my SAMSUNG-SM-G935A using Tapatalk


Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Wj project
« Reply #4 on: November 12, 2016, 08:17:59 PM »
Looking good. I like the look of WJs with lifts
1994 YJ on 37s

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Wj project
« Reply #5 on: November 13, 2016, 01:43:35 AM »
Screw the sway bars. Will wheel much better with out them anyways.
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline DirtyJeep92

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 438
  • 96 XJ HP44/9" 37s chopped caged.
Re: Wj project
« Reply #6 on: November 13, 2016, 08:35:55 PM »
Screw the sway bars. Will wheel much better with out them anyways.
Definitely keep the rear installed but disconnects for the front would be a plus
ED 2

Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Re: Re: Wj project
« Reply #7 on: November 13, 2016, 08:41:08 PM »
Screw the sway bars. Will wheel much better with out them anyways.
I didn't anything about the rear sway bars haha but you're right, I don't need them at all. I'm about to cut the rear lower bolts for the shocks and be done with it haha

Sent from my SAMSUNG-SM-G935A using Tapatalk


Offline bonecollector

  • Paid Members
  • Trail Queen
  • ***
  • Posts: 96
Re: Wj project
« Reply #8 on: November 14, 2016, 08:57:52 PM »
What are sway bars?

Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Re: Re: Wj project
« Reply #9 on: November 14, 2016, 08:59:39 PM »
What are sway bars?
This made me smile

Sent from my SAMSUNG-SM-G935A using Tapatalk


Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Re: Wj project
« Reply #10 on: November 25, 2016, 10:02:03 PM »
****UPDATE***
So far the wj has come along quite well.. got the spacers in, mounted the tires and the spacers, she looks good rides good I think... I still have to do some trimming on the front fenders. I have limited turning radius l due to clearance issues.



Sent from my SAMSUNG-SM-G935A using Tapatalk


Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: Wj project
« Reply #11 on: November 26, 2016, 12:36:34 AM »
Looks great. Time for some trimming.
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline zjchef25

  • Rock Crawler
  • ****
  • Posts: 358
Re: Wj project
« Reply #12 on: November 26, 2016, 08:29:58 PM »
Trimming done for now. The bumper has to go and I need to take in the fender more as well as take in the pinch seam down there


Sent from my SAMSUNG-SM-G935A using Tapatalk


Offline DirtyJeep92

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 438
  • 96 XJ HP44/9" 37s chopped caged.
Re: Wj project
« Reply #13 on: December 01, 2016, 03:52:31 AM »
G&G fabrication or G&G something makes nice bumpers for wjs. That have DIY kits too
ED 2

Offline BlacXJeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1464
    • My Webshots
Re: Wj project
« Reply #14 on: December 23, 2016, 01:27:37 AM »
Looking good bro! Progress since I last saw you!
Andy Doucette - A.K.A.(Douce)
W.O.J.