« previous next »
Pages: [1]   Go Down

Author Topic: Steering box bracing  (Read 2464 times)

Offline bonecollector

  • Paid Members
  • Trail Queen
  • ***
  • Posts: 96
Steering box bracing
« on: March 10, 2016, 01:27:21 PM »
I have already done the steering box spacer (between box and frame), and plan to install front frame stiffeners. Wanted to gage opinions on a brace that clamps the steering box and ties it in to the inside of the passenger 'frame' :

Something like this:

http://www.amazon.com/M-O-R-E-SB9037XJ-Steering-Box-Brace/dp/B00DBHCTE4


Any experience good or bad?


Logged

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Steering box bracing
« Reply #1 on: March 10, 2016, 02:36:58 PM »
I don't have a JK so I don't know if they have issues that would need a steering box brace or if they even make them for JKs. I used to have one in a CJ7, but they were known for twisting up or cracking the frame under extreme pressure. I could see the frame flex if I had somebody turn the wheel at a stop and that went away with the brace.
Logged
1994 YJ on 37s

Offline toreadorranger

  • Paid Members
  • Mudd Hog
  • ***
  • Posts: 235
Re: Steering box bracing
« Reply #2 on: March 10, 2016, 05:57:47 PM »
He is talking about for use on his XJ. 
Logged

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: Steering box bracing
« Reply #3 on: March 10, 2016, 10:24:01 PM »
I run a very similar one on my YJ, works great!
Logged
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!

Offline calvynandhobbs

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 3087
Re: Steering box bracing
« Reply #4 on: March 10, 2016, 10:36:14 PM »
Quote from: toreadorranger on March 10, 2016, 05:57:47 PM
He is talking about for use on his XJ. 

Where did I come up with JK from? LOL His pic is even his XJ. I don't see where it will hurt with an XJ. I've heard of lots of issues with ripping steering boxes out of the unibody frame or twisting the unibody frame up around the box.
Logged
1994 YJ on 37s

Offline bonecollector

  • Paid Members
  • Trail Queen
  • ***
  • Posts: 96
Re: Steering box bracing
« Reply #5 on: March 11, 2016, 11:42:53 PM »
Logged

Offline DirtyJeep92

  • Paid Members
  • Rock Crawler
  • ***
  • Posts: 438
  • 96 XJ HP44/9" 37s chopped caged.
Re: Steering box bracing
« Reply #6 on: March 13, 2016, 06:39:58 PM »
Do it now before it's too late mine is plated and still tore I gotta take it all apart and make up some new braces
Logged
ED 2
Pages: [1]   Go Up
« previous next »