The Mud Pit > Wrenching
Drag link bent down.....how did that happen?
Magnum Opus:
I am investigating a mild case of Death Wobble. I was pretty sure it was due to a tweaked tie-rod since it continued after I swapped and relocated the steering stabilizer. I noticed that all the joints from pitman arm down were kinda goofy with no flex on the suspension and the wheels straight....and the drag link looked bent down. I would have expected if anything it would have been bent up....weird. I have a tie-rod and a drag link in the wish list, but was wondering if anyone else had seen anything like this. My first thought is that when my stabilizer crossed over into the spirit world I could not turn right.....maybe I bent the drag link then? I would like to understand the physics of this one so I can properly prevent reoccurance!
Going with Synergy replacement parts (eventually) any experience with those?
JKSue:
I have the Synergy tie rod & drag link (& ball joints because that's what was causing my little bit of wobble). I don't remember what your set up is, but there are a few things to keep in mind with the drag link if you have a high steer kit - I needed an adapter because of the drag link flip & the already reamed hole & that was a PITA. Synergy doesn't make the old tapered adapter anymore & the new one they sell didn't work for me. I finally found the old one at Northridge & I was all set. People also have issues with 15 in wheels - if you have 16s with 4 3/4 backspace or less it's not a problem. I think all this is listed on Synergys website, probably worth a check.
Magnum Opus:
RGR and thank you Sue! I am going after the Tie Rod first, and might try to get it groomed in with an allignment before that (burned up all my Christmas money fixing body damage!). All in all it is not terrible, but I know it will get worse if I do not chase it down.
JKSue:
Good luck, I'm sure someone else (ok, anyone really) can help you better than me with diagnosing some wobble, but what I've learned from my issues:
If it's TRUE DW, like you crap your pants & it only stops when you come to a stop wobble, it's most likely gonna be the trackbar. Check the bolts, make sure the holes aren't torn up or ovaled out.
If it's just a little wobble here & there, like mine was, check out this mega DW thread - if you have the patience to go through it, you will find the problem. http://www.wranglerforum.com/f202/diagnosing-death-wobble-and-fixing-non-dw-shimmies-and-wobbles-78034.html
But easy to start with: check your ball joints, mine were completely shot with 20k on it & 35s. Also make sure your tires are balanced, can't do much with an alignment on the JKs except adjust the toe, but it's nice to know the numbers.
Magnum Opus:
Good call on the balancing....didn't even think about maybe throwing a weight. Also wobble is pretty mild, still going after big parts, but I think it just needs a tweak or two. Gonna check the link when I get home. Work comp system has that sight blocked.....they just take all the fun out of life.
Navigation
[0] Message Index
[#] Next page
Go to full version