The Mud Pit > Trading Post
Transfercase
JSchwinn:
Hey, for some reason my Tcase wont shift into 4-lo so rather than mess around with it I decided I would see if anyone has some sitting around they'd sell? I'm going to do a SYE when I do my 8.8 so I figure it'd make my life easier to just grab another one so the jeep isn't out of commission while I mess with the current case. When I do the swap I can figure out whats wrong with it and use it as a spare. I have some random parts lying around so maybe can work a trade into it.
calvynandhobbs:
Have you checked the linkage underneath? 9 times out of 10 the linkage is fouled up or if you've installed a body lift the shifter is hitting the body and cannot go all the way into position.
JSchwinn:
I messed around with it a little bit when I dropped from the 3" BL it came with to a 1". It isn't hitting the body, just doesn't seem to want to go back into 4-lo. Most likely it's a simple fix, was more looking to get another just to do the SYE in advance of the swap and then just sell the one in it after I'm done or keep it as a spare.
Mr Rock:
--- Quote from: calvynandhobbs on March 04, 2015, 05:19:57 PM ---Have you checked the linkage underneath? 9 times out of 10 the linkage is fouled up or if you've installed a body lift the shifter is hitting the body and cannot go all the way into position.
--- End quote ---
What he said, the PO may have moved the boot to make it work with the taller BL...
As for the SYE install,you don't have to take it out, it can be done while the case is still in the jeep. I know people that have done it that way!
calvynandhobbs:
--- Quote from: Mr Rock on March 10, 2015, 04:06:41 PM ---
--- Quote from: calvynandhobbs on March 04, 2015, 05:19:57 PM ---Have you checked the linkage underneath? 9 times out of 10 the linkage is fouled up or if you've installed a body lift the shifter is hitting the body and cannot go all the way into position.
--- End quote ---
What he said, the PO may have moved the boot to make it work with the taller BL...
As for the SYE install,you don't have to take it out, it can be done while the case is still in the jeep. I know people that have done it that way!
--- End quote ---
I did it that way on my Cherokee over at Kirk's house several years ago. I had a kink in my neck for two days after that so I took my case out this time on the YJ and it is on the benchtop.
Navigation
[0] Message Index
[#] Next page
Go to full version