The Mud Pit > Wrenching

Rock's YJ Project

(1/4) > >>

Mr Rock:
Well, I got the jeep in the garage!

It has a 360, T-18, Dana 20, D44 axles, 36-13.5's, full Cage. It needs a clutch, a rear stretch, tube fenders complete interior, windshield, rock rails, flat belly skid, drive shafts, front regear, rear locker.... Still deciding on the rear suspension..

Way too much to do before summer, but I'm going to try.

So here is what it looks like today!

calvynandhobbs:
Rock, the picture doesn't work. If you want a set of practice front fenders for mock up I have the old ones off my YJ. The inner fenderwells are good, but the outer (that you'll be cutting anyway) are dented and have rust holes. My YJ came with brand new front OEM fenders on it and I threw the old ones in the truck for making my flatfenders. I've already gone a different route.

gearhead1985B:
any plans for more gearing out of the d20 or are you going to rock the 2 to 1 low

Mr Rock:

--- Quote from: gearhead1985B on March 28, 2013, 09:36:07 AM ---any plans for more gearing out of the d20 or are you going to rock the 2 to 1 low

--- End quote ---

Going to roll with the 2-1 for now, I figured with the granny 1st gear, and the torque of the 360 I should be ok.....

gearhead1985B:

--- Quote from: Mr Rock on March 28, 2013, 08:35:41 PM ---
--- Quote from: gearhead1985B on March 28, 2013, 09:36:07 AM ---any plans for more gearing out of the d20 or are you going to rock the 2 to 1 low

--- End quote ---

Going to roll with the 2-1 for now, I figured with the granny 1st gear, and the torque of the 360 I should be ok.....

--- End quote ---

if you want i can check into a set of dana 18 gears for it

Navigation

[0] Message Index

[#] Next page