Author Topic: P0743 code  (Read 1972 times)

Offline Mayhem

  • BANNED
  • Rock Crawler
  • *****
  • Posts: 336
P0743 code
« on: October 07, 2012, 02:54:46 PM »
So driving yesterday and the check engine light starts showing.  Go to Autozone and they scan it showing p0743, torque converter solenoid. On the drive home from there, it kicks into full lock up at like 5 mph. Giving gas kicks it back out. Could this be something simple?  Or is this a tear apart trans and replace solenoid?
Greg
Model Citizen

Offline kirksjeep

  • Honorary Member
  • Trail Master
  • ***
  • Posts: 1267
  • It's hip to be square (headlights) !
Re: P0743 code
« Reply #1 on: October 11, 2012, 03:06:14 AM »
Bob????????
1992 YJ Sahara, 4.5 Rubicon Express ED Lift, 35" BFG MT, Custom Bumpers, SYE/CV Drive Shaft, OBA, Ford 8.8 rear, 4.10 gears, tie rod flip, 1"MML/BL
2002 KJ Liberty, 2" Lift, 31" tires/DD
2002 F-150 Harley Davidson 5.4L SC
2013 Explorer Sport
2006 Harley Road King Classic
1988 Honda Hawk GT

Offline skibum

  • Paid Members
  • Trail Master
  • ***
  • Posts: 869
Re: P0743 code
« Reply #2 on: October 11, 2012, 04:25:42 AM »
Thats going to need some diag time. :(  Don't feel it's something as simpill as a bad TCC Lock Up Solinoid cuz something is turnng it on & off so I no it's working. Sounds like a wiring issue(something shorting to power or ground), Also could be a PCM issue. Unless you have spare parts to throw into it to see what will fix it then I would recomend performing the proper diag per the service manual cuz electral parts are non returnable once you plug it in & if it's a SOP from a dealer then you owne it no matter what. Look over the entire wire harness from engine to trans to see if there is any chaffing to the body, trail or debris damage. What im trying to say is look for the obvious. Just take your time cuz electral issues need time to diag. Thats why it can cost crazy amounts of cash when a shop is trying to diag an electral issue. Hope this helps you. Good luck
09 Rubi 4Dr,Compleat Heavy Duty Polly Performance skid plate system,Kilby Evap Relocation kit,Rampage front bumper,Swaybar motor flip,Clayton 3.5in lift w/steering corection kit,35in GY MTR's on 15in MB Wheels,Ace Enginering Rear Bumper W/Tire carrier,Prorock D44 Front axel,5.13s,cromo rear shafts

Offline Mayhem

  • BANNED
  • Rock Crawler
  • *****
  • Posts: 336
Re: P0743 code
« Reply #3 on: October 11, 2012, 01:51:31 PM »
Gonna look at it some more soon.  In the midst of a master suite remodel right now.  Kind of short on time to spend looking at it. This jeep just keeps breaking.  Starting to piss me off a little >:(
Greg
Model Citizen

Offline Mayhem

  • BANNED
  • Rock Crawler
  • *****
  • Posts: 336
Re: P0743 code
« Reply #4 on: October 12, 2012, 01:52:10 PM »
Fixed it.  Tiny spot scraped through the harness, right near the computer, and grounded the red/light green wire that goes to the solonoid.  Taped the little spot on harness and put rubber cap on bolt that caused it. Good as new. 8)
Was beginning to think this Jeep was yellow because it was a lemon.  Thanks for the help.
Greg
Model Citizen

Offline Mr Rock

  • Administrator
  • Trail Master
  • *****
  • Posts: 1571
Re: P0743 code
« Reply #5 on: October 13, 2012, 12:01:13 AM »
That's great!

another unseen diagnostic by Bob, way to go, love having you around!
'89, 4.2, NUTTERED, Team Rush, 4" Lift, 1" BL, 1" MML & HD shackles , Flat Belly Skid, SYE, 36 x 13.50s
XRC8, 150w KC's, Herculined, Tauras Elec Fan, Dual Batteries, Aussie in front, 8.8, TJ flares & Spool in rear, topless all of the time!