The Mud Pit > Wrenching

Axel and Locker

<< < (4/5) > >>

Mr Rock:
How did you make out this weekend? are you going to be ready for Saturday's run?

B52BUFF:
I can't get the locker in. It locks up as soon as we tighten the bolts. We pulled out the pinion and didn't find but one shim.  Changed the seals and bearings there also.  Have been talking to the guy at work and it seems I have done it all wrong.  I NEED HELP!!!!!! My brother and I are at the end of our rope.

Mr Rock:
How did you make out? Do you have it back together yet???

B52BUFF:
So here is the deal.  The locker is in after a long argument with 4wd.com. I ended up taking the TJ to Bob's Auto in Groton.  It was through them that I found out that it didn't fit. When I ordered the locker/axle kit I was assured that it would work with my Dana 35 3.07 ring and pinion.  My brother and I tried for weeks to figure out what we were doing wrong.  Turns out that the locker was made for a 3.54 and up. So I spent another $600 in parts (3.73 R/P for the rear and 3.73 R/P plus carrier for the front) to get it on the road. On top of that it cost a pretty penny to have Bob's Auto do the work. Being that they had to take everything out and piece it back together.  I learned plenty.  I changed all the seals and bearings. I learned I get a bit claustrophobic under my Jeep even with jack stands in place. I learned that if I need a specialty tool to work on the TJ, I can go to either Autozone or Advanced Auto and they will check them out to me for no charge. (Slide Hammer with all the attachments and a Bearing Installation Tool) My next project between now and Florida Vacation is to put on the new lower control arms. When the Jeep was on the lift at Bobs i saw just how mangled they were. So now she is back on the road.  It is interesting driving a vehicle with an auto locker. It has taken a little getting use to.

skibum:
Glad to hear its all back together. You must have noticed a big difference going from 3.07s to 3.73s. Its going to krawl much better now. I no how you feel about spending so much cash. I was sick to my stomic after ordering the lift, wheels, tires & rear bumper for my jeep. Wish it only cost $600 but went just a tad over that ::).  Its all going on the 30th of this month. Can't wait ;D.  See you at Florida Vacation.

Navigation

[0] Message Index

[#] Next page

[*] Previous page