The Mud Pit > General
RTI ramp
BlacXJeep:
make sure it has wheels and tires too, there big on that up north... ;D
moosin:
Alright here's the steel I've got 2pcs that are 1-1/2"x3" and about 13'-6" long and 1pc same size but is 20' long I also have 5pcs of 2"x2" square that are 2' long. All this steel was originally aquired for an RTI ramp so please if we can use it to keep the cost down lets do it.
Flex:
i also have 2 pieces of 8' i beams to throw in
Mr Rock:
I have a bunch of broken axles!
Mr Rock:
--- Quote from: moosin on May 30, 2011, 11:37:34 PM ---Alright here's the steel I've got 2pcs that are 1-1/2"x3" and about 13'-6" long and 1pc same size but is 20' long I also have 5pcs of 2"x2" square that are 2' long. All this steel was originally aquired for an RTI ramp so please if we can use it to keep the cost down lets do it.
--- End quote ---
If I remember (and that's asking alot of my old brain) they were made so you can couple the two pieces together. that will give us a 20' base to begin with.
I also have an old two place snowmobile trailer that I could donate to the project. It should give us the axle, lighting and some other steel to use.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version