The Mud Pit > General

a/c pulley/clutch is shot

<< < (3/3)

zjchef25:
I recharge my ac myself lol... Yet I still have to replce my condensor that's sitting in the garage... Does anyone have the tools?

BlacXJeep:
ok, back on topic. I picked up a whole compressor from the junk yard, mostly for the pulley/clutch. I am now reading that there is a special tool required to remove the clutch from the compressor. I'd really like to just swap them out, and leave my compressor intact. Anyone know how to do this or who would have the tool. The dealership refuses to do it. They want me to buy a $900 compressor.

gearhead1985B:
you are going to have to do it out off the jeep so ask a shop if they will suck out the freon that is in there and you might be able to just swap compressors

kirksjeep:
Have you tried to rent a tool from Advance or Auto Zone.  If you break into the system, you will need to have the system vacummed to pull out any moisture and then recharged.  I think the vauccum and recharge cost around $100 so if you can prevent breaking into the system you will save a few $$$.

Navigation

[0] Message Index

[*] Previous page