The Mud Pit > Wrenching

Track Bar Axle Mount

<< < (2/2)

calvynandhobbs:
It's the axle side that is bad. The frame side has no movement at all. I have a RE adustible track bar in it that has a bushing on the axle end and heim joint on the frame side. I already have a new track bar bushing to install since I had assumed it was the bushing before seeing the wallowed out hole. I also bought new control arm bushings for all the way around my Jeep at the same time, but if this cures 80%+ of the handling issues I'll wait until after school is done in July before I start taking all of the controls arms off to replace bushings.

moosin:
Roger

Just give Ed a call I think he is planning on helping you out next weekend.

Mel

Flex:

--- Quote from: calvynandhobbs on June 14, 2010, 06:21:16 PM ---I found this thread over on Jeepforum for repairing the track bar mount on the axle so this is probably what I'll do. I'm going to try unbolting it later this week to see how bad the hole looks and make sure the bracket isn't twisted at all. Ed or Nate, since we have activities this coming Saturday maybe I can schedule with one of you two for the weekend of the 26th to do some welding. I don't want to let it go too long since it is progressively getting harder to keep on the road and between the lines.

http://www.jeepforum.com/forum/f9/broken-front-track-bar-bracket-905624/



--- End quote ---

the axles r the same, an yes i can weld it up whenever works for u.

Navigation

[0] Message Index

[*] Previous page