The Mud Pit > Wrenching

bumper

<< < (13/21) > >>

albsvx:
planning on it, but if nobody else shows, is 2 people enough to handle it?  (Angela will be there, but usually isn't all too helpful in the garage)

rocket:
should be.  the only hard part is holding up the bumper while marking the holes to drill.  i've got plenty of jack stands/jacks to make it doable.  I have to to prep stuff, so if you aren't coming, please call.

rocket out!

albsvx:
I already plan on going to Cafe on Main regardless (potentially meeting some other people there too) so I'll definitely be there, just waiting for Angela to get home

Axle:
How did it go?  Were you guys able to mount the bumper?

rocket:
Thanks Al for your help.  As you can tell by the lack of pics, the bumper is NOT on :(

After massaging the holes on one bracket, and straightineing out the part of the truck where the other one mounted, we were able to set the bumper on the brackts for a test fit.  It appears i need to unbolt a few parts from the front to make it fit.  One of thoes parts holds the front of the skid plate on.  I could cut/grind to make it work, but Bent-Up told me no mods were necessary.  I need to call them to see if they screwed something up or if i DO need to cut/grind.  I'll keep y'all posted

Navigation

[0] Message Index

[#] Next page

[*] Previous page